| A. | Hatchery-nursery pond complex at Hub Reservoir | ||
| A-1. | General layout | 1:2 500 | |
| A-2. | Gravel filter pool | 1:50 | |
| B. | Hatchery-nursery pond complex at Tarbela Reservoir | ||
| B-1. | General layout | 1:2 500 | |
| C. | Hatchery-nursery pond complex at Mangla Reservoir | ||
| C-1. | General layout | 1:1 000 | |
| C-2. | Longitudinal sections of drainage canals | 1:100; 1:1 000 | |
| C-3. | Earthworks - Cross sections I. | ||
| C-4. | Earthworks - Cross sections II. | ||
| D. | Pond component | ||
| D-1.1 | Drainage of broodfish ponds | ||
Layout plan and cross sections | 1:50 | ||
| D-1.2 | Drainage of nursery ponds | ||
Layout plan and cross sections | 1:50 | ||
| D-1.3 | Drainage of rearing ponds | ||
Layout plan and cross sections | 1:50 | ||
| D-1.4 | Culverts | ||
Layout plan and cross sections | 1:50 | ||
| D-2.1 | Details of monk tower | 1:25 | |
| D-2.2 | Details of monk outlet | 1:25 | |
| D-2.3 | Details of twin sluice | 1:25 | |
| D-2.4 | Details of culvert: Inlet and outlet | 1:25 | |
| D-3.1 | Control boards of drainage structures | 1:10 | |
| D-3.2 | Steel grates of drainage structures | 1:5 | |
| E. | Hatchery component | ||
| E-1. | Layout plan and cross sections of the hatchery building | 1:50 | |
| E-2.1 | R.c.c. spawning tank | 1:25 | |
| E-2.2 | Multipurpose tank - Volume 2 × 1.3 m3 | 1:25 | |
| E-2.3 | Multipurpose tank - Volume 2 × 2.6 m3 | 1:25 | |
| E-2.4 | Elevated reservoir | 1:50 | |
| E-3.1 | Module steel stand: Base frame | 1:10 | |
| E-3.2 | Module steel stand: Supplementary elements for 20 l incubators | 1:10 | |
| E-3.3 | Module steel stand: Supplementary elements for 60 l incubator-rearing jars | 1:10 | |
| E-3.4 | Steel stand for 200 l incubator-rearing jars | 1:10 | |
| E-3.5 | Aerator tower | 1:10 | |
| E-3.6 | Steel grate of floor drain | 1:10 | |
| E-4.1 | Fibre glass incubators and rearing jars | ||
| E-4.2 | Fibre glass drain trough | 1:15 | |
| E-4.3 | Water distributing pipes | 1:10 | |
| E-4.4 | Fibre glass overhead tank | 1:25 | |
