Chapter 10 Quality control/quality assurance and international trade; good manufacturing practices (gmp); hygiene requirements; hazard analysis and critical control points (haccp)

Contents - Previous - Next

10.1 Quality control/quality assurance and international trade

10.1.1 General

The international trade in processed fruits and vegetables is very large with an ever increasing number of different types being processed and exported. Whereas once, processing was limited to mostly temperate climate fruits and vegetables, the change has now broadened to include tropical and subtropical types.

The reasons are twofold. Firstly, consumers' dietary habits have become more diverse so that, for example people living in North America may very well like fruit and vegetables grown in Africa or Asia. Secondly, processing techniques, whether they be for canning, freezing or drying, have been improved to an extent where final product is palatable, nutritious and of long and reliable shelf life.

Many developing countries have taken advantage of the continuing worldwide demand for processed fruits and vegetables and earned valuable foreign exchange from exports of products to profitable markets.

The export quality control and inspection of processed fruits and vegetables is directed at ensuring that the final products:

have been processed in a registered export establishment that is constructed, equipped and operated in an hygienic and efficient manner;

conform to the requirements of the export regulations for processed fruits and vegetables, and those of the importing country, in respect of such things as quality grades, defects, ingredients, packaging materials, styles, additives, contaminants, fill of container, drained weight; and,

conform to labelling requirements.

 

10.1.2 Inspection and certification procedures

In most countries, in processing fruits and vegetables for export, it is not customary to apply continuous inspection as it is in the case of meat. Few, if any, importing countries require it, and the nature of the products themselves is such that only part time check inspection is required during processing together with statistically based inspection, including sampling and analysis, of final product.

However, in circumstances where an establishment is processing export product for the first time, it can be argued that there is an advantage in adopting continuous inspection until the operation is satisfactorily established.

In any event, inspection of raw materials should be carried out at the commencement of each processing run to ensure that only sound fruit or vegetables of sufficient maturity (degree of ripeness) are used for processing. Sampling checks of raw materials should be carried out as frequently as the inspector thinks necessary.

The inspector must ensure that adequate hygiene practices are followed during the processing of the product. For example, in the case of canned and frozen products and other processing methods, raw materials should be washed absolutely clean so that fruit and vegetables entering the processing line are free from dirt, superficial residues of agricultural chemicals, insects and extraneous plant material.

In the case of dried product, especially where the raw material is sun-dried on drying greens or racks, care must be taken to minimize contamination by bird and animal droppings, dust and extraneous plant material. It is often necessary to wash the dried product to ensure cleanliness of the final product.

In the case of canning and freezing, the inspector must obtain full details of the processing programme for at least the following day from management, so that an adequate inspection programme can be scheduled.

In much the same way as for fresh fruit and vegetables, the inspector must also be aware of the pesticides and other chemicals used in the production of the raw materials. Necessary laboratory analyses can then be arranged to ensure residue levels in the final product do not exceed tolerances adopted by importing countries.

At the commencement of and during processing, the inspector should pay attention to the state of raw materials, the preparation of raw materials for processing (peeling, slicing, dicing, blanching, etc.), preparation and density of packing medium (sugar syrup, salt brine, etc.), the state of cans or containers to be used (cleanliness and strength), the cooking or freezing process (time/temperature relationship), can filling and closure and can/container storage.

After processing, the inspector should check the final product to ensure the drained or thawed weight, the vacuum and headspace, packing medium strength and that can/container conditions are satisfactory. Statistically based sampling plans should be adopted for the examination of final product to ensure it meets the requirements of the export regulations.

The labelling applied to cans/containers should also be checked to ensure both their correctness and compliance with the export regulations and the requirements of those countries in which the product is to be marketed.

Cans should also be examined to make sure that the correct embossing relating to the product, its date of production and the registered number of the export establishment has been applied.

Each establishment registered for the export of processed fruit and vegetables or for canned or frozen foods should have its own quality laboratory sufficiently equipped and staffed to carry out physical, chemical and microbiological examinations of the goods.

Inspectors should have access to the laboratory facilities and the establishment's quality control records as and when required. Independent laboratory examination of product should be made by the agency having responsibility for export on the basis of a statistically developed sampling plan.

In those countries where fruit and vegetable production is a seasonal event, processing for export generally takes place at the time of peak production and then declines, often to a halt, as the supply of raw materials declines. As a result, most export establishments produce at their peak of production far more product than they export at that time.

Therefore, most manufacturers find it necessary to store product for considerable periods before it is exported. Thus, proper storage is essential if the product is to retain its quality and cans remain untarnished. Inspectors should regularly inspect storage facilities, noting their conditions and that of the stored product, looking for signs of deterioration such as pest infestation and rusting of cans.

Prior to export, the exporter should be required to notify the export quality and inspection agency of his intention to export in accordance with the provisions of the export processed fruits and vegetables regulations and on the prescribed "Notice of Intention to Export" form.

The notice should be submitted in sufficient time before the shipment date to enable the product to be inspected satisfactorily; the intensity of inspection depending on the original state of the product, the conditions under which it has been stored and the length of storage. When product is approved, the agency will issue the exporter an "Export Permit" authorizing Custom's clearance of the product.

 

10.1.3 Labelling

Customers and consumers expect the labelling on food to be a true description of what they are buying.

Misleading or fraudulent labelling is an unfair trade practice that cannot be tolerated. Most countries now have labelling laws stipulating how foods are to be labelled and what information labels must contain. Most, if not all of those laws have in common requirement that the label should bear:

In addition, labels may also be required to include, amongst other things, the country of origin, date of manufacture or packing, a use-by or expiry date, nutritional qualities or values of the food, storage directions, a quality grade and directions for preparing the food.

More frequently than is often realized, consignments of food exports arriving on foreign markets are not permitted entry because the labelling does not comply with the mandatory requirements of the importing country.

This sometimes results in consignments being rejected, but more often in them being withheld from entry until the labelling is corrected or new labelling applied. In either case, trade is interrupted and the cost involved may make sales unprofitable. It is essential therefore, that exporters be familiar with the food labelling requirements of importing countries.

 

10.1.4 Export Quality Control and Inspection Systems for Foods

With the advent and development of a food consciousness amongst consumers, stimulated by the work of the Joint FAO/WHO Codex Alimentarius Commission through its elaboration of food standards, codes of hygienic practice and the Code of Ethics for International Trade in Food, an increasing number of countries have adopted sophisticated food laws and established food control agencies, some with the aid of FAO.

Consequently, those countries no longer accept products on trust that they are satisfactory, but instead, demand that food imports meet the requirements of their food laws and pass inspection by their control agencies. Moreover, many of them require exporting countries to certify that products comply with their national legislation and some also require additional special declarations.

As a result of these developments the emphasis of activity of Export Quality Control and Inspection Systems has changed. Although most of them still establish their own standards of quality control and adopt standards for foods for export, most of their effort and resources are now directed at ensuring that foods for export meet the mandatory requirements of importing countries and providing the necessary associated certification. To do otherwise is to invite either the detention or, at worst, rejection of product at point of entry.

 

10.1.5 Detentions and rejections

Food exporting countries can no longer assume that there is a good chance that products not complying with the requirements of importing countries will escape the inspection at the point of entry.

Details of foods imports released by the United States Food and Drug Administration (FDA) indicate that significant quantities of product are at least detained, and at worst rejected, because they fail to meet U.S. food laws.

Reasons given for the detentions include:

The message for food exporting countries is quite clear - ensure your products comply with the mandatory requirements of importing countries or run the very real risk of having them rejected at considerable financial loss to the exporter and the country and resulting in damage to the commercial reputation of both.

While the foregoing relates to the U.S.A. experience, because it is the only country that currently publishes data about detentions and rejections of food imports it can be assumed that record more or less reflects the experience of other food importing countries. It might well be asked why such significantly high levels of detentions and rejections of food imports take place.

Undoubtedly the reasons are many and varied. However, the evidence shows that the most important reasons include:

All four can be remedied by governments if they possess sufficient political will and take the necessary steps to do so.

10.2 Good manufacturing practices (gmp); hygiene requirements

10.2.1 Personnel

10.2.1.1 . Disease control

Any person who has an illness, open lesions, including boils, sores, infected wounds, or any other abnormal source of microbial contamination must not work in any operation (in a food processing centre) which could result in the food, food-contact surface, or food packaging materials becoming contaminated.

10.2.1.2. Cleanliness

The following applies to people who work in direct contact with food preparation, food ingredients or surfaces of equipment or utensils that will contact food: they must wear clean outer garments, maintain a high degree of personal cleanliness and conform to hygienic practices while on duty; they must wash their hands thoroughly and, if they are working at a job where it is necessary, they must also sanitize their hands before starting work, after each absence from the workstation and at any other time when the hands have become soiled or contaminated; they must also remove all unsecured jewelry. People who are actually handling food, should remove any jewelry that cannot be properly sanitized from their hands; it is necessary to wear effective hair restraints, such as hairnets, caps, headbands or beard covers; operators must not store clothing or other personal belongings in food processing areas. Also, eating food, drinking beverage or using tobacco (in any form) must not be allowed in food processing area; all necessary steps have to be taken by supervisors to prevent operators from contaminating foods with microorganisms or foreign substances such as perspiration, hair, cosmetics, tobacco, chemicals and medicants.

10.2.1.3. Education and training

Persons who are monitoring the sanitation programs must have the education and/or experience to demonstrate that they are qualified. Food handlers and supervisors should receive training that will make them aware of the danger of poor personal hygiene and unsanitary work habits.

10.2.1.4. Supervision

Someone must be assigned the responsibility that all personnel will comply with all the requirements of these GMP's.

10.2.2 Plants and grounds

10.2.2.1. Grounds around a food processing centre which are under the control of this centre must be free from conditions such as: improperly stored equipment; litter, waste or refuse; uncut weeds or grass close to buildings; excessively dusty roads, yards or parking lots; inadequately drained areas - potential foot-borne filth or breeding places for insects or microorganisms; inadequately operated systems for waste treatment and disposal. 10.2.2.2. Plant construction and design shall: provide enough space for sanitary arrangement of equipment and storage of materials; floors, walls and ceilings must be constructed so that they are cleanable and must be kept clean and in good repair; separate by partition, location, time and other means, any operations that may cause cross-contamination of food products with undesirable microorganisms, chemicals, filth or other extraneous material; provide effective screening or other protection to keep out birds, animals and vermin such as insects and rodents. provide adequate ventilation to prevent contamination of foods with odours, noxious fumes or vapours (including steam); light bulbs, skylights or any other glass must be of the safety type or protected so that glass contamination cannot occur in case of breakage.

 

10.2.3 Sanitary operations

10.2.3.1. General maintenance.

The plant and all fixtures must be kept in good repair and be maintained in a sanitary condition. Cleaning operations must be conducted in a manner that will minimize the possibility of contaminating foods or equipment surfaces that contact food.

10.2.3.2. Pest control

10.2.3.3. Sanitation of equipment and utensils

10.2.3.4. Storage and handling of clean portable equipment and utensils

a) This refers to portable equipment or utensils which have surfaces that will contact foods;

b) When such equipment or utensils have been cleaned and sanitized, they should be stored in a manner that will protect the food contact surfaces from splash, dust and other contamination.

 

10.2.4 Sanitary facilities and controls

10.2.4.1. Water supply.

Any water that comes into contact food or processing equipment must be safe and of adequate sanitary quality.

10.2.4.2. Sewage disposal

Must flow into an adequate sewage system or disposed of through other adequate means.

10.2.4.3. Plumbing

Must be of adequate size and design to:

  1. Supply enough water to areas in the plant where it is needed;
  2. Properly convey sewage or disposable liquid waste from the plant;
  3. Not create a source of contamination or unsanitary condition;
  4. Provide adequate floor drainage where hosing-type cleaning is done or where operations discharge water or liquid waste onto the floor;
  5. Insure that there is no backflow from cross-connection between piping systems that discharge waste water or sewage, and those that carry water for food or food manufacturing.

10.2.4.4. Toilet facilities

  1. Toilets and hand-washing facilities must be provided inside the fruit and vegetable processing centres;
  2. Toilet tissue must be provided;
  3. Toilets must be kept sanitary and in good repair;
  4. Toilet rooms must have self-closing doors;
  5. Toilet rooms must not open directly into areas where food is exposed unless steps have been taken to prevent airborne contamination (example: double doors, positive airflow, etc.);
  6. Signs must be posted that direct employees to wash their hands with soap or detergent after using the toilet.

10.2.4.5. Hand-washing facilities

a) Adequate and convenient hand-washing and, if necessary, hand-sanitizing facilities must be provided anywhere in the plant where the nature of employees jobs requires that they wash, sanitize and dry their hands;

b) These hand-washing facilities must provide:

10.2.4.6. Rubbish and offal disposal must be handled in such a manner that they do not serve to attract or harbour pests or create contaminating conditions.

10.2.5 Equipment and utensils

  1. Equipment and utensils must be designed and constructed so that they are adequately cleanable and will not adulterate food with lubricants, fuel, metal fragments, contaminated water, etc.
  2. Equipment should be installed so that it, and the area around it, can be cleaned;
  3. Food contact surfaces shall be made of nontoxic materials and must be corrosion-resistant;
  4. Seams on food contact surfaces shall be smoothly bonded, or maintained in order to minimize the accumulation of food particles, dirt and organic matter;
  5. Equipment in processing areas that does not come into contact with food shall be constructed so that it can be kept clean;
  6. Holding, conveying and manufacturing systems, including gravimetric, pneumatic, closed and automated systems, shall be maintained in a sanitary condition;
  7. Each freezer and cold storage compartment shall have an indicating thermometer, temperature measuring or recording device, and should have an automatic control for regulating temperature, or an automatic alarm system to indicate a significant temperature change;
  8. Instruments and controls used for measuring, regulating or recording temperatures, pH, acidity, water activity, etc. shall be adequate in number, accurate and maintained.

 

10.2.6 Processes and controls

There must be an individual who is responsible for supervising the overall sanitation of the plant.

10.2.6.1. Raw materials and ingredients

  1. Must be inspected and sorted to insure that they are clean, wholesome and fit for processing into human food;
  2. Must be stored under conditions that will protect against contamination and minimize deterioration;
  3. Must be washed or cleaned to remove soil and other contamination:
  1. Raw materials shall not contain levels of microorganisms that may produce food poisoning or other disease, or they shall be pasteurized or otherwise treated during manufacturing operations so that the product will not be adulterated;
  2. Materials susceptible to contamination with natural toxins, e.g., aflatoxin, shall comply with national and international official levels before they are incorporated into the finished food;
  3. Materials susceptible to contamination with pests, undesirable microorganisms, or extraneous material, shall comply with national and international regulations, guidelines and defect action levels;
  4. Materials shall be stored in containers, and under conditions which protect against contamination;
  5. Frozen materials shall be kept frozen. If thawing is required prior to use, it shall be done in a manner that prevents contamination.

10.2.6.2. Manufacturing operations

  1. Food processing equipment must be keep in a sanitary condition through frequent cleaning and, when necessary, sanitizing. If necessary, such equipment must be taken apart for thorough cleaning.
  2. It is necessary to process, package and store food under conditions that will minimize the potential for undesirable microbiological growth, toxin formation, deterioration or contamination. To accomplish this may require careful monitoring of such factors as time, temperature, humidity, pressure, flow rate, etc. The object is to assure that mechanical breakdowns, time delays, temperature fluctuations or other factors do not allow the foods to decompose or become contaminated.
  3. Food shall be held under conditions that prevent the growth of undesirable microorganisms as follows:
  1. Measures such as sterilizing, irradiating, pasteurizing, etc., shall be adequate to destroy or prevent the growth of undesirable microorganisms;
  2. Work-in-process shall be protected against contamination;
  3. Finished food shall be protected from contamination;
  4. Equipment, containers and utensils shall be constructed, handled and maintained to protect against contamination;
  5. Measures, e.g., sieves, traps, metal detectors, shall be used to protect against the inclusion of metal or other extraneous material in food;
  6. Food or materials that are adulterated shall be disposed of in a manner that prevents other food from being contaminated;
  7. Mechanical manufacturing steps such as washing, peeling, etc., shall be performed to protect against contamination by providing adequate protection from contaminants that may drip, drain or be drawn into the food, by adequately cleaning and sanitizing all food-contact surfaces and by using time and temperature controls at and between each manufacturing step;
  8. Heat-blanching should be done by heating the food to the required temperature, holding it at this temperature for the required time, and then either rapidly cooling the food or passing it to the next manufacturing step without delay;
  9. Filling, assembling, packaging, and other operations shall be performed in such a way that the food is protected against contamination by:
  1. Food such as, but not limited to, dry mixes, nuts, intermediate moisture food, and dehydrated food, that relies on the control of aw for preventing the growth of undesirable microorganisms shall be processed to and maintained at a safe moisture level by:
  1. Food such as, but not limited to, acid and acidified food, that relies principally on the control of pH for preventing the growth of undesirable microorganisms shall be monitored and maintained at a pH of 4.6 or below by: - Monitoring the pH of raw materials, food in process, and finished food; - Controlling the amount of acid or acidified food added to low-acid food;
  2. If ice is used and comes in contact with food products, it must be made from potable water and be in a sanitary condition;
  3. Areas and equipment that are used to process human food should not be used to process non-human food-grade animal feed, or inedible products unless there is no possibility of contaminating the human food;
  4. A coding system should be utilized that will allow positive lot identification in the event it is necessary to identify and segregate lots of food that may be contaminated.

Contents - Previous - Next