Aegisson, G. y Endal, A. 1992. Energy conservation programme in the Indian fisheries. Energy conservation programme. IND38 Ref. 402009.00.02.92. Marintek, Norway.
Annamalai, V. y Kandoran, M. 1996. Trends and cycles in fishery returns from motorised traditional fishing craft. Fishery Technology, 33(1). Cochin, India, Central Institute of Fisheries Technology.
Annamalai, V. y Kandoran, M. 1990a. Economics of motorised traditional craft. Fishery Technology, 27. Cochin, India, Central Institute of Fisheries Technology.
Annamalai, V. y Kandoran, M. 1990b. Motorising traditional craft: Problems and prospects of the innovation. Fish Technology Newsletter, VI (Oct.–Dec). Cochin, India, Central Institute of Fisheries Technology.
Anon. 1987. Engine model L40 stern arrangement. Japan, Yanmar Diesel Engine Co.
Anon. 1970. Efficient propulsion. Research and Development Bulletin, 36. White Fish Authority.
ASEAN/UNDP/FAO. 1981. Basic data for designing propeller and boat. Fuktomi Report on the training course on small-scale fisheries extension. Ref. RAS/84/016. ASEAN/UNDP/FAO Regional Small-scale Coastal Fisheries Development Project.
Ayyappan Pillai, S. y Sreedharan Namboodiri, K. 1991. Problems in mechanisation of low-energy fishing craft for coastal water. In Proceedings of the National Workshop on Low-energy Fishing. India, Society of Fisheries Technologists.
Baird, N. 1998. World marine engine propulsion systems. Melbourne, Australia, Baird Publications Ltd.
Bartlett, T. 1996. The right prop. Motorboat and yachting, June.
Berg, A. 1982. Full-scale experiences with propeller re-installation on a purse seiner. Paper presented at the International Conference on Propulsion for Small Craft. London, Royal Institution of Naval Architects.
Billington, G. 1985. Fuel use control in the fishing industry. Proceedings of the World Symposium on Fishing Gear and Fishing Vessel Design. Ref. R 103. St John's, Newfoundland, Canada, Marine Institute.
Boopendranath, M. 1996. Approaches to energy conservation in fishing. Regional Training Course in Commercial Fishing Technology. Training Department. Thailand, Southeast Asian Fisheries Development Centre.
Byrne, D. y Ward, G. 1982. The cost of hull roughness versus the cost of hull smoothness. Paper presented at the Conference on Priorities for Reducing the Fuel Bill. Institute of Marine Engineers.
Calisal, S.M. 1985. Methods to reduce fuel consumption of fishing vessels, BMT Abstracts, 41(12).
Campbell, J. y Beare, R. 1986. The evaluation of vessel and engine performance. Kambia Fisheries Development Project. Lymington, UK, MacAlister Elliott and Partners.
Carter, G. y Martin, M. 1964. Parafin engine performance. Ref. Report D.150/8. UK, Westfair Limited.
Centre d'Assistance pour la Motorisation des Pirogues (CAMP). 1988. Experimentation of Yanmar diesel motors in Senegal.
Dahle, E. 1982. Fuel saving and fuel conservation in fishing. Paper Presented at the International Conference on Propulsion for Small Craft. London, Royal Institution of Naval Architects.
Dickson, W. 1988. Energy savings in fisheries and evaluation of its effects. In Proceedings of the World Symposium on Fishing Gear and Fishing Vessel Design. St John's, Newfoundland, Cananda, Marine Institute.
Diffey, S. 1991. Experiences in the use of Yanmar diesel outboard engine: Outer Island Fisheries, Kiribati. Fiji, FAO Regional Fishery Support Programme. (internal communication)
Dyne, G. 1983. Ship propulsion improvement. Eighth school ship design for fuel economy. Gothenburg, West European Graduate Education in Marine Technology.
FAO. n.d. Fuel consumption in fishing. By E. de Boer. Rome. (in draft)
FAO. n.d. Some notes on the search for sustainable and more fuel-efficient propulsion for artisanal fishing canoes. By R. Beare. Rome. (internal communication)
FAO. 1971. Notes on characteristics recommendations for outboards engines in coastal fishing. by A. Witzenburg. Rome. (internal document)
FAO. 1981. Fuel consumption in fishing. By E. De Boer. Rome. (internal report)
FAO. 1983. Report on fitting outboard motors to Ghanaian fishing canoes. By Rawson, G. Rome. (internal document)
FAO. 1985a. A preliminary account of attempts to introduce alternative types of small craft into West Africa. By Ø. Gulbrandsen. Programme for Integrated Development of Artisanal Fisheries in West Africa (IDAF), Cotonou. Ref. WP3. Rome.
FAO. 1985b. Feasibility study on the use of 4-stroke petrol outboard motors on small size traditional fishing canoes in West Africa, By J. Fyson. Rome. (internal document)
FAO. 1985c. Practical fuel saving guide for skippers. By E. de Boer. Rome. (internal report)
FAO. 1985d. Report on a trip to West Africa. By Ø. Gulbrandsen. Rome.
FAO. 1985e. TCP assistance to artisanal fisheries, By J. Fyson, N. Coackley, 0. Gulbrandsen y N. Vikanes. Rome. (internal report)
FAO. 1987a. Economies de carburant et engins de pêche. By M. Ferretti. In CGPM. Etudes et revues. Ref. No. 62. Rome.
FAO. 1987b. Energy saving on trawlers: some factors related to design and propulsion. By G. Messina. In In GFCM. Studies and Reviews. Ref. No. 62. Rome.
FAO. 1987c. Review of field projects in small-scale fisheries in West Africa. By S. Akester. Rome.
FAO. 1987d. Seamanship, sailing and motorisation. By D. Davy. Programme for Integrated Development of Artisanal Fisheries in West Africa (IDAF), Cotonou. Ref. IDAF/WP/18. Rome.
FAO. 1988. Recent developments of the artisanal fisheries in Ghana. By J. Haakonsen. Programme for Integrated Development of Artisanal Fisheries n West Africa (IDAF), Cotonou. Ref. IDAF/WP/21. Rome.
FAO. 1989a. Diesel outboard engine statistics. By R. Beare. Integrated Development of Rural Fishing Villages. Rome. (internal document)
FAO. 1989b. Fuel consumption data. Programme for Integrated Development of Artisanal Fisheries in West Africa (IDAF), Cotonou. Rome.
FAO. 1990. Fishing craft development in kerala. By Ø. Gulbrandsen y M. Andersen. Ref. TCP/IND/8852A.
FAO. 1991. Cost and earnings and credit studies on the Ghanaian canoe fisheries. By E. Callerholm Cassel. Programme for Integrated Development of Artisanal Fisheries in West Africa (IDAF).'Cotonou Ref. IDAF/WP/34. Rome.
FAO. 1995a. Código de Conducta para la Pesca Responsable. Rome.
FAO. 1995b. Technology developments in capture fisheries. By D. MacLennan. Rome.
FAO/Fishing News Books. 1985. Design of small fishing vessels. Fyson J., ed. Ref. N20 266031. Rome.
Gerr, D. 1989. The propeller handbook. London, Nautical Books.
Gifford, E. y Palmer, C. 1985. Energy saving and rig development for artisanal fishing boats. International Conference on Design, Construction and Operation of Commercial Fishing Vessels. USA, Florida Sea Grant College.
Gilbert, L. 1983. Fishing vessel fuel control. New Zealand, Fishing Industry Training Council.
Government of Western Samoa. 1988. Testing of diesel outboard engines for the Alia small boat fishery in Western Samoa. Fishery Division, Government of Western Samoa 20th Regional Technical Meeting on Fisheries. Ref. 20/WP.35. South Pacific Commission.
Gulbrandsen, Ø. 1988. Small fishing craft in developing countries - what is the experience? Paper presented at the World Symposium on Fishing Gear and Fishing Vessel Design. St John's, Newfoundland, Canada, Marine Institute.
Hearn, Prof. G. y Yaakob, Omar Bin. 1997. Power, performance and operability of 24 m fishing boats - by design? Paper presented at the Conference on Power, Performance and Operability for Small Craft. London, Royal Institution of Naval Architects.
Henderson, K. 1992. The outboard motor manual. London, Adlard Coles Nautical.
Hochstadt, H. 1997. Direct injection automotive engines. Paper presented at the Australia-Korea Automotive Technology Symposium.
Hollin, D. y Windh, S. 1984. Cutting fuel costs: Alternatives for commercial fishermen. USA, Texas AyM University Sea Grant College Program.
Houston, Dr. R y Newmann, R. 1997. Direct injection 4-stroke gasoline engines, the orbital combustion process solution. Paper presented at the Euro IV Conference on the Challenge of Future Technologies and Systems. London, Institute of Mechanical Engineers.
Intermediate Technology Development Group. 1989. Small engines development for artisanal fishing boats in South India. Report to the ODA Joint Funding Scheme. UK.
Jones, T. 1996. The four-stroke option. Motorboat and Yachting, June.
Joselin, Prof. P. 1989. Performance of imported outboard engines in Indian conditions. Paper presented at the National Workshop on Technology for Small-scale Fishworkers. Trivandrum, India, South Indian Federation of Fishermen Societies.
Kasahara T. y Bokura, D. 1988. Future trends in outboard motors. Paper presented at the World Symposium on Fishing Gear and Fishing Vessel Design. St John's, Newfoundland, Canada, Marine Institute.
Kazuyuki, T. 1984. How to operate a small diesel engine for fishing boats. Training Department. Ref. TD/TRB/No 33. South East Asian Fisheries Development Center.
Kazuyuki, T. 1985. Maintenance of diesel engines for fishing boats. Training Department. Ref. TD/TRB/ No. 36. South East Asian Fisheries Development Center.
Lange, K. 1988. Fuel consumption tests with Ghana plank herring boats. Tombo, Sierra Leone, GTZ Fisheries Pilot Project.
Laurence, C. 1984. Vessel operating economics. London, Fairplay Publications.
Leighton, S. y Cebis, M. et al. 1994. The OCP small engine fuel injection system for future two-stroke marine engines. International Off-Highway and Powerplant Congress y Exposition. Ref.SAE, Paper 941687. Milwaukee, USA, Society of Automotive Engineers.
Lundgren, G. 1985. A simple method to determine optimum vessel speed. Paper presented at the International Conference on Design, Construction and Operation of Commercial Fishing Vessels. USA, Florida Sea Grant College.
MacAlister, R.G. 1985. The application of sail in fisheries development. In Proceedings of the Regional Conference on Sail-Motor Propulsion. Manila, AsDB.
MacAlister Elliott y Partners, eds. 1988. Sails as an aid to fishing. Lymington, UK MacAlister Elliott y Partners.
Manohar Doss, R. et al. 1997. Returns from motorised traditional craft in Veraval coast. Fishery Technology, 34(2). Cochin, India, Central Institute of Fisheries Technology.
Marbury, F. 1983. The finer points of slow steaming.Ship costs and energy symposium proceedings. Ref. Paper C-4. New York, USA, Society of Naval Architects and Marine Engineers.
Martin, M. 1989a. Initial work on parafin operation of the QUB90 engine. Ref. Report S54. UK, Westfair Limited for British Seagul.
Martin, M. 1989b. Issues in the design of kerosene outboard motors for use in fisheries. Paper presented at the National Workshop on Technology for Small-scale Fishworkers. Trivandrum, India, South Indian Federation of Fishermen Societies.
Martin, M. y Magee, J. 1989. Further work on kerosine operation of the ‘Kingfisher’ engine. Ref. Report S99. UK, Westfair Limited for British Seagul.
National Institute for Oceanographic and Marine Research. 1988. Short, medium and long term propulsion systems for the small scale fisheries of Nigeria. Lagos.
Nova Scotia Department of Fisheries. 1989. Technology transfer - energy conservation. Canada.
Panikkar, K. et al. 1991. A study on economics of different fishing techniques along the Kerala coast with special reference to fuel efficiency. In Proceedings of the National Workshop on Low-energy Fishing. India, Society of Fisheries Technologists.
Patience, G. 1982. The contribution of the propeller to energy conservation in ship operation. Conference on Priorities for Reducing the Fuel Bill. Trans ImarE, 1982 (94). Ref. Paper C99. Institute of Marine Engineers.
Plueddeman, C. Fab four - Comparison test. Popular Mechanics Magazine. Hearst Corporation.
Rübesamen, K. 1988a. Fuel consumption test: Modified Ghana planked diesel boat, traditional Ghana planked outboard boat. Tombo, Sierra Leone, GTZ Fisheries Pilot Project.
Rübesamen, K. 1988b. Fuel saving propulsion diesel inboard motorisation of Ghana planked boats, Tombo, Yawri Bay. Tombo, Sierra Leone, GTZ Fisheries Pilot Project.
Rübesamen, K. y During, S. 1988. Fuel saving propulsion for Ghana planked boats, Tombo, Yawri Bay. Tombo, Sierra Leone, GTZ Fisheries Pilot Project.
Schneekluth, H. 1988. Ship design for fuel efficiency and economy. London, Butterworths.
Sewel, R. y Sainsbury, J. 1985. Performance measurements of a 25 ft sail-assisted fishing vessel. Paper presented at the International Conference on Design, Construction and Operation of Commercial Fishing Vessels. USA, Florida Sea Grant College.
Shahul Hameed, M. y Asok Kumar, K. 1991. Problems of energy optimization in fisheries. In Proceedings of the National Workshop on Low-energy Fishing. India, Society of Fisheries Technologists.
Sheshappa, D. 1991. Design of propulsion plants for energy efficient fishing vessels. In Proceedings of the National Workshop on Low-energy Fishing. India, Society of Fisheries Technologists.
Smith, C.F. 1985. The proper propeller. USA, New York Sea Grant.
Smith, C.F, Lapp, P. y Sedat, R. 1985. Should there be a propeller nozzle on your trawler? USA, New York Sea Grant.
Svensen, T. 1982. Techno-economic reasons for selecting fuel saving priorities. Paper presented at the Conference on Priorities for Reducing the Fuel Bill. Institute of Marine Engineers. Country?
Swedish International Development Authority/FAO. 1986a. Pivoting engine installation for beachlanding boats. By A. Overa. Bay of Bengal Programme. Ref. BOBP/WP/44. Madras, India.
Swedish International Development Authority/FAO. 1986b. Reducing the fuel costs of small fishing vessels, by Gulbrandsen, Ø. Bay of Bengal Programme. Ref. BOBP/WP/27. Madras, India.
Swedish International Development Authority/FAO. 1987. Fishing trials with beach landing craft at Uppada, Andhra Pradesh, India. By L. Nyberg. Bay of Bengal Programme. Ref. BOBP/WP/56. Madras, India.
Swedish International Development Authority/FAO. 1991. Report on technical consultation on small scraft and propulsion systems. Bay of Bengal Programme. Madras, India.
Swedish International Development Authority/ FAO. 1993a. Developing and Introducing beach landing craft. By V. Pietersz. Bay of Bengal Programme. Ref. BOBP/REP/54. Madras, India.
Swedish International Development Authority/FAO. 1993b. Development of canoes in Shri Lanka. By G. Pajot y Ø. Gulbrandsen. Bay of Bengal Programme. Ref. BOBP/REP/59. Madras, India.
Swedish International Development Authority/FAO. 1993c. Safety at sea. By Ø. Gulbrandsen y G. Pajot. Bay of Bengal Programme. Ref. BOBP/ MAG/16. Madras, India.
Swedish International Development Authority/FAO. 1993d. Small offshore fishing boats in Shri Lanka, by Pajot, G. Bay of Bengal Programme. Ref. BOBP/REP/61. Madras, India.
Thankappan Achari, T. 1989. Socio-economic impact of motorisation. Paper presented at the National Workshop on Technology for Small-scale Fishworkers. Trivandrum, India, South Indian Federation of Fishermen Societies.
Towsin, R.L. 1983. Bottom condition and fuel conserva-tion. Eighth school ship design for fuel economy. Gothenburg, West European Graduate Education in Marine Technology.
Towsin, R.L. y Byrne, D. 1980. Speed, power and roughness: The economics of outer bottom maintenance. Trans RINA, 1980 (122). London, Royal Institution of Naval Architects.
Towsin, R., Byrne, D., Svensen, T. y Milne, A. 1981. Estimating the technical and economic penalties of hull and propeller roughness. Trans SNAME, 1981(82). New York, USA, The Society of Naval Architects and Marine Engineers.
Traung, J.-A. 1975. Fishing boats of the world. UK, Fishing News Books.
Umeda, N. 1997. Proceedings of the International Workshop on Fishing Vessel Technology. Ref. No. 6. Hasaki, Japan, National Research Institute of Fisheries Engineering.
University of Michigan/The Society of Naval Architects and Marine Engineers, eds. 1996. Proceedings of the Small Craft Marine Resistance and Propulsion Symposium. New York, USA, University of Michigan/The Society of Naval Architects and Marine Engineers.
Vivekanandan, V. 1991. Kerala fisheries - Growing energy inefficiency. In Proceedings of the National Workshop on Low-energy Fishing. India, Society of Fisheries Technologists.
Ward, N. 1985. The performance of high-speed fishing vessels in service. Industrial Development Unit. Ref. Tech Rep No. 257. UK, Sea Fish Industry Authority.
Webster, P. The Honda revolution. Fisherman y Boatowner Magazine.
Wilson, J. y Davy, D. 1993. Field trials of artisanal fishing vessels. Ref. R4223. Lymington, UK, MacAlister Elliott y Partners.
Woods Hole Oceanographic Institute. (n.d.) Marine fouling and its prevention, United States Naval Institute, Maryland, USA.
Woodward, J. 1973. Matching engine and propeller. The Department of Naval Architecture and Marine Engineering. Ref. 142. USA, University of Michigan.
Yamamoto, S. 1982. Stern equipment for small fishing boats. Training Department. Ref. TD/TRB/No.24. Southeast Asian Fisheries Development Center.
