| Commodity: |
Cotton |
| Traits: |
Insect resistance |
| Name of product applicant: |
Monsanto Australia Limited |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
23/08/2018 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
OECD BioTrack Product Database
|
| Summary of the safety assessment (food safety): |
|
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
A1154 – Food derived from insect-protected cotton line MON88702
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Food Standards Australia New Zealand
Contact person name: Gaya Subramaniam
Website:
Physical full address: Level 4, 15 Lancaster Place, Majura Park ACT 2609, Australia
Phone number: +61 2 6271 2222
Fax number: +61 2 6271 2278
Country introduction: Food Standards Australia New Zealand (FSANZ) is the regulatory agency responsible for the development of food standards in Australia and New Zealand. The main office (approximately 115 staff) is located in Canberra (in the Australian Capital Territory) and the smaller New Zealand office (approximately 10 staff) is located in Wellington on the North Island. Useful links
Relevant documents
Stacked events: FSANZ does not: Separately assess food from stacked event lines where food from the GM parents has already been approved; Mandate notification of stacked events by developers; Notify the public of stacked event ‘approvals’; List food derived from stacked event lines in the Code, unless the stacked event line has been separately assessed as a single line e.g. Application A518: MXB-13 cotton (DAS-21023-5 x DAS-24236-5)
No separate approval or safety assessment is necessary for foods derived from a stacked GM line that is the result of traditional breeding between a number of GM parent lines for which food has already been approved. Food from the parent lines must be listed in the Australia New Zealand Food Standards Code. The parent lines may contain any number of different genes. If food from any of the GM parent lines has not been approved, then a full pre-market safety assessment of food from the stacked line must be undertaken.
No separate approval is required for food derived from a line that is the product of a GM line, for which food has been approved, crossed traditionally with a non-GM line.
Where a single line containing a number of genes has been produced as a result of direct gene technology methods (rather than traditional crossing) then food derived from the line must undergo a full pre-market safety assessment before approval can be given Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Food Standards Australia New Zealand (FSANZ) (http://www.foodstandards.gov.au)
| Name of product applicant: |
BASF Canada Inc. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
19/10/2018 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
BioTrack Product Database
|
| Summary of the safety assessment (food safety): |
Please see the decision document weblink |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
Novel Foods Decision Document
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Health Canada
Contact person name: Neil Strand
Website:
Physical full address: 251 Sir Frederick Banting Driveway, Tunney's Pasture, PL 2204A1
Phone number: 613-946-1317
Fax number:
Country introduction: Federal responsibility for the regulations dealing with foods sold in Canada, including novel foods, is shared by Health Canada and the Canadian Food Inspection Agency (CFIA). Health Canada is responsible for establishing standards and policies governing the safety and nutritional quality of foods and developing labelling policies related to health and nutrition. The CFIA develops standards related to the packaging, labelling and advertising of foods, and handles all inspection and enforcement duties. The CFIA also has responsibility for the regulation of seeds, veterinary biologics, fertilizers and livestock feeds. More specifically, CFIA is responsible for the regulations and guidelines dealing with cultivating plants with novel traits and dealing with livestock feeds and for conducting the respective safety assessments, whereas Health Canada is responsible for the regulations and guidelines pertaining to novel foods and for conducting safety assessments of novel foods.
The mechanism by which Health Canada controls the sale of novel foods in Canada is the mandatory pre-market notification requirement as set out in Division 28 of Part B of the Food and Drug Regulations.
Manufacturers or importers are required under these regulations to submit information to Health Canada regarding the product in question so that a determination can be made with respect to the product's safety prior to sale. The safety criteria for the assessment of novel foods outlined in the current guidance document (i.e. Canadian Guidelines for the Safety Assessment of Novel Foods) were derived from internationally established scientific principles and guidelines developed through the work of the Organization for Economic Cooperation and Development (OECD), Food and Agriculture Organisation (FAO), World Health Organisation (WHO) and the Codex Alimentarius Commission. These guidelines provide for both the rigour and the flexibility required to determine the need for notification and to conduct the safety assessment of the broad range of food products being developed. This flexibility is needed to allow novel foods and food products to be assessed on a case-by-case basis and to take into consideration future scientific advances. Useful links
Relevant documents
Stacked events: Food: Consistent with the definition of "novel food" in Division 28 of the Food and Drug Regulations, the progeny derived from the conventional breeding of approved genetically modified plants (one or both parents are genetically modified) would not be classified as a novel food unless some form of novelty was introduced into such progeny as a result of the cross, hence triggering the requirement for pre-market notification under Division 28. For example, notification may be required for modifications observed in the progeny that result in a change of existing characteristics of the plant that places those characteristics outside of the accepted range, or, that introduce new characteristics not previously observed in that plant (e.g. a major change has occurred in the expression levels of traits when stacked). In addition, the use of a wild species (interspecific cross) not having a history of safe use in the food supply in the development of a new plant line may also require notification to Health Canada. However, molecular stacks are considered new events and are considered to be notifiable as per Division 28.
Feed: Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Neil Strand, Section Head of Novel Foods
| Name of product applicant: |
MON88702 |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
25/08/2020 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Based on the risk assessment, it can be concluded that the event shows the same risks as its conventional counterpart. Therefore, the National Technical Committee for GMO use exclusively in health and human consumption (CTNSalud) recommends its authorization.
|
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministerio de salud y proteccion social
Contact person name: Daniel Rubio
Website:
Physical full address: Carrera 13 No. 32- 76 piso 12, Bogotá
Phone number: 330 5000 ext 1256
Fax number:
Country introduction: The 4525 decree of 2005, established the Ministry of Health and Social Protection as the competent authority for GMO for health and food purposes and creates the National Biosafety Technical Committee for GMO's used in health and food purposes (CTNSalud).
The CTNSalud is composed by the Ministry of Health and Social Protection, the National Food and Drug Surveillance Institute (INVIMA) and the Technology and Innovation Administrative Department (COLCIENCIAS). This committee is responsible for the assesment of risk assessments; to inquire for any additional information; assessment of any measurements in accordance to the Cartagena Protocol; and the recommendation for the authorization of GMO for health or food purposes. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Monsanto Japan Ltd. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
21/01/2019 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Please see the links below. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
MON 88702 line, a cotton tolerant to hemiptera, thysanoptera and coleoptera herbicides
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Food Safety Commission Secretariat,Cabinet Office,
Contact person name: Kojiro Yokonuma
Website:
Physical full address: Akasaka 5-2-20 Minato Ward,Tokyo,Japan
Phone number: 81 3 6234 1122
Fax number: 81 3 3584 7392
Country introduction: Safety assessments of GM foods are mandatory under the Food Sanitation Law in Japan. The Ministry of Health, Labour, and Welfare (MHLW) legally imposes safety assessments of GM foods so that those that have not undergone safety assessments would not be distributed in the country. MHLW receives application and requests the Food Safety COmmission of Japan (FSCJ) to evaluate the safety of GM foods in terms of human health. Safety assessments are carried out by FSCJ. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Bayer Co. (Malaysia) Sdn. Bhd. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
04/04/2024 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
Department of Biosafety Malaysia
CBD Biosafety Clearing House
|
| Summary of the safety assessment (food safety): |
Please refer to the Risk Assessment Report. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Department of Biosafety Malaysia
Contact person name: Dr. Anita Anthonysamy
Website:
Physical full address: Department of Biosafety,
Ministry of Natural Resources and Environmental Sustainability
Level 4, Block F11, Complex F
Lebuh Perdana Timur, Precinct 1
62000 Putrajaya, Malaysia
Phone number: +60380917322
Fax number: +60380917371
Country introduction: GM food safety assessment is a requirement by law under the Biosafety Act 2007 in Malaysia. The National Biosafety Board reviews and makes decisions on events based on a scientific/technical risk assessment, policy considerations as well as public input. The decisions and its related documents made are publicly available through the Malaysian Department of Biosafety Website and the Convention of Biological Diversity Biosafety Clearing House. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Department of Biosafety, Ministry of Natural Resources and Environmental Sustainability, Level 4, Block F11, Complex F Lebuh Perdana Timur, Precinct 1 62000 Putrajaya, Malaysia. Email: [email protected]. Url: www. biosafety.gov.my
Food Safety and Quality Division, Ministry of Health, Level 4, Menara Prisma, No. 26, Persiaran Perdana, Putrajaya, Malaysia, 62675. Phone: +603 88850797 Fax: +603 88850790 Email: [email protected]
| Name of product applicant: |
Monsanto Australia Limited |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
30/10/2018 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
BioTrack Product Database
|
| Summary of the safety assessment (food safety): |
No potential public health and safety concerns have been identified in the assessment of
MON88702. On the basis of the data provided in the present Application, and other available information, food derived from MON88702 is considered to be as safe for human
consumption as food derived from conventional cotton varieties. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
A1154 – Food derived from insect-protected cotton line MON88702
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministry for Primary Industries
Contact person name: john vandenbeuken
Website:
Physical full address: Pastoral House, 25 The Terrace, Wellington, 6012
Phone number: 0298942581
Fax number:
Country introduction: New Zealand and Australia share a joint food regulation system for the composition of labelling of most foods. Food Standards Australia New Zealand (FSANZ) is the regulatory agency responsible for the development of the joint food standards in Australia and New Zealand. The main office (approximately 120 staff) is located in Canberra (in the Australian Capital Territory) and the smaller New Zealand office (approximately 15 staff) is located in Wellington on the North Island. Useful links
Relevant documents
Stacked events: FSANZ does not: Separately assess food from stacked event lines where food from the GM parents has already been approved; Mandate notification of stacked events by developers; Notify the public of stacked event ‘approvals’; List food derived from stacked event lines in the Code, unless the stacked event line has been separately assessed as a single line e.g. Application A518: MXB-13 cotton (DAS-21023-5 x DAS-24236-5) Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Monsanto Philippines, Inc. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
12/05/2021 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Toxicological and Allergenicity Assessment
Results of Western blot analysis revealed that intact mCry51Aa2 protein was
present throughout the incubation time in pancreatin but with reduced
intensity and protein fragments over time. This characteristic behavior is
similar with other Cry proteins such as Cry3Bb1, Cry1Ac, and Cry1A.105. Sequential digestion of mCry51Aa2 protein using both pepsin and pancreatin
was also done using SDSPAGE and Western blot analyses to further assess its
susceptibility to gastrointestinal digestion enzymes. Results of SDS-PAGE
showed that the mCry51Aa2 protein was digested within 2 min incubation time
in pepsin while complete digestion of ~4kDa small transient protein fragments
in pancreatin was observed within 0.5min. Western blot analysis, on the other
hand, showed that mCry51Aa2 protein was digested within 2min of pepsin
exposure. The result of heat inactivation study demonstrated a predictable protein
tendency of denaturation and loss of functional activity at higher temperature. Bioinformatics analyses were performed to assess the potential toxicity of the
mCry51Aa2 protein sequence. The results showed that there is a 28% similarity
with GI1102943401, which is an aerolysin. However, it does not exhibit
similarity in the receptor-binding domain, which is vital in identifying the
identity of the target receptor within the entire mode-of-action. Thus, the
alignment of mCry51Aa2 with GI1102943401 did not provide any information
to indicate mCry51Aa2 to be toxic towards organisms other than the intended
hemipteran and thysanopteran insect pests. [21][31]. The result of the acute oral gavage showed that there were no treatment-related effects on survival, clinical observations, body weight gain, feed intake and gross pathology. FASTA sequence alignment program and an eight-amino acid sliding window search in conjunction with the "COMprehensive Protein Allergen REsource" (COMPARE) database were used to assess the potential for allergenicity of the mCry51Aa2 protein. The results showed that, there is no structurally and immunologically relevant similarities between the protein sequences of mCry51Aa2 and known allergens, gliadins, and glutenins.
Nutritional Data
Proximate analysis showed that the difference in protein composition of
cottonseed of MON88702 and conventional control was within the natural
variability. Meanwhile, all proximate parameters were within the range values
reported in literature and ILSI. Seven fatty acids (i.e. lauric acid, myristic acid, palmitic acid, stearic acid, oleic
acid, arachidic acid, behenic acid) were observed for compositional difference
between that in the cottonseed of MON88702 versus the conventional cotton
control. While lauric acid has unavailable values in literature and ILSI Crop
Composition Database (ILSI-CCDB), the other six fatty acids, were found within
the natural variability of these respective components as published in the
scientific literature on cotton composition and/or the ILSI-CCDB. Calcium mean
level of cottonseed of MON88702 was also found to be within the natural
variability of this component as published in the scientific literature on cotton
composition and/or the ILSI-CCDB. There were no significant differences in seed anti-nutrient levels between
MON88702 and the conventional control.
STRP’S RECOMMENDATION
STRPs find scientific evidence that the regulated article applied for direct use as food
and feed or for processing is as safe as its conventional counterpart and shall not pose
greater risk to human and animal health. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
May 11, 2026 |
E-mail:
Organization/agency name (Full name): Bureau of Plant Industry
Contact person name: Geronima P. Eusebio
Website:
Physical full address: San Andres St., Malate, Manila
Phone number: 632 404 0409 loc 203
Fax number:
Country introduction: In 1987, scientists from the University of the Philippines Los Banos (UPLB) and the International Rice Research Institute (IRRI), the Quarantine Officer of the Bureau of Plant Industry (BPI), and the Director for Crops of the Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), recognizing the potential harm of the introduction of exotic species and genetic engineering, formed a committee and formulated the biosafety protocols and guidelines for genetic engineering and related research activities for UPLB and IRRI researchers. The committee went on to draft a Philippine biosafety policy, which was submitted to the Office of the President. On October 15, 1990, recognizing the potential for modern biotechnology both in improving the lives of the people and in creating hazards if not handled properly, President Corazon C. Aquino issued Executive Order 430 creating the National Committee on Biosafety of the Philippines (NCBP) that will formulate, review and amend national policy on biosafety and formulate guidelines on the conduct of activities on genetic engineering. The NCBP is comprised of representative of the Departments of Agriculture (DA); Environment and Natural Resources (DENR); Health (DOH); and Science and Technology (DOST), 4 scientists in biology, environmental science, social science and physical science; and 2 respected members of the community. On July 16, 2001, President Gloria Macapagal-Arroyo issued the Policy Statement on Modern Biotechnology, reiterating the government policy on promoting the safe and responsible use of modern biotechnology. On April 3, 2002, Department of Agriculture Administrative Order No. 8, Series of 2002 was issued implementing the guidelines for importation and release into the environment of Plants and Plant Products Derived from the Use of Modern Biotechnology. On March 17, 2006, President Gloria Macapagal-Arroyo issued Executive Order No.514 Establishing the National Biosafety Framework, prescribing guidelines for its implementation, reorganizing the National Committee on Biosafety of the Philippines, and for other purposes. On December 8, 2015, the Philippine Supreme Court declared DA AO8 null and void and any application for contained use, field testing, propagation and commercialization, and importation of GMOs was temporarily enjoined. In response to the nullification of DA AO8, the Technical Working Group composed of representatives from the Departments of Agriculture (DA), Science and Technology (DOST), Environment and Natural Resources (DENR), Health (DOH), and Interior and Local Government (DILG) drafted the Joint Department Circular No. 1, Series of 2016 (JDC No.1, S2016) titled 'Rules and Regulations for the Research and Development, Handling and Use, Transboundary Movement, Release into the Environment, and Management of Genetically-Modified Plant and Plant Products Derived from the Use of Modern Biotechnology'. There were series of meeting and five public consultations conducted before the JDC No.1, S2016 was approved and signed by the Secretaries of the abovementioned agencies on March 7, 2016 and took effect on April 15, 2016. Under this Circular, more government agencies were involved such as the Department of Science and Technology (DOST) to regulate applications for contained use and confined test of regulated articles; Department of Agriculture (DA) to evaluate applications for field trial, commercial propagation and transboundary movement of regulated articles; Department of Environment and Natural Resources (DENR) to evaluate environmental risks and impacts of regulated articles; Department of Health (DOH) to evaluate of environmental health impacts of regulated articles; and Department of the Interior and Local Government (DILG) to supervise public consultation during field trial.
Useful links
Relevant documents
Stacked events: Gene stacking in plants can be conferred either through genetic engineering or conventional breeding A full risk assessment as to food and feed or for processing shall be conducted to plant products carrying stacked genes conferred through genetic engineering or conventional breeding, where the individual traits have no prior approval for direct use as food and feed or processing from the Bureau of Plant Industry (BPI) A desktop or documentary risk assessment on the possible or expected interactions between the genes shall be conducted for stacked gene products with multiple traits conferred through conventional breeding and individual events granted prior approval by the Bureau of Plant Industry.
Plant Products Carrying Stacked Genes Conferred Through (a) Genetic Engineering or b) Conventional Breeding, with Individual Traits That Have No Prior Approval:
A full risk assessnent as to food and feed or processing shall be conducted,consistent with Part V of AO No. 8,"Approval Process For the Importation of Regulated Articles for Direct Use as Food and Feed or For Processing for plant products with multiple traits conferred through:
(a) genetic engineering, or
(b) conventional breeding, where the individual traits have no prior approval from the Bureau of Plant Industry (BPI) for direct use as food and feed or processing.
Plant Products Carrying Stacked Genes Conferred through Conventional Breeding:
For plant products with multiple traits conferred through conventional breeding,with all individual events granted prior approval and included in the Approval Registry, a notlfication shall be submitted by the technology developer to the BPI, which shall conduct an evaluation in accordance with the relevant criteria in Annex I of this Memorandum Circular. The list of data contained in Annex I will not preclude the inclusion of other issues and concerns that will be raised by the BPI and the Scientific and Technical Review Panel (STRP) during the course of the desktop review.
Notificatlon Requirement for Plant Products Carrying Stacked Genes
All technology developers shall submit a notification to the Bureau of Plant Industry of their developed plant products carrying stacked genes and shall be required to comply with the relevant approval process listed above.
The Bureau of Plant Industry shall issue a certiflcate as to the approval of the stacked gene product and shall likewise include the transformation event in the official approval registry of plant products for food and feed or processing. Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Bureau of Plant Industry 692 San Andres St, Malate, Manila 1004
| Name of product applicant: |
Bayer |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
05/01/2022 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
The MON88702 (MON-887Ø2-4) cotton was produced by an Agrobacterium tumefaciens-mediated plant transformation event. The event conferred the trait of resistance to hemipteran and thysanopteran insect pests. Molecular analyses indicate that a single copy of the transgenic insert is present at a single insertion site in the genome, and the transgenic insert is stably inherited. The protein that gives rise to the trait - mCry51Aa2 - has a well defined mode of action. Expression level of the newly expressed protein was low in all plant tissues, and the protein does not share appreciable similarities to known protein toxins or allergens. Composition analyses indicate the seed of MON88702 cotton is compositionally equivalent to seeds from conventional cotton varieties. In conclusion, food derived from MON88702 cotton is as safe as food derived from conventional cotton varieties. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Singapore Food Agency (SFA)
Contact person name: Dr Tan Yong Quan
Website:
Physical full address: 52 Jurong Gateway Road 14-01 JEM Office Tower Singapore 608550
Phone number: (65)68052750
Fax number:
Country introduction: The Singapore Food Agency (SFA) is a Statutory Board established under the Ministry of Sustainability and the Environment (MSE) to oversee food safety and security. SFA’s mission is to ensure and secure a supply of safe food. SFA adopts a risk-based approach to food safety. Foods with foodborne hazards that may pose potential food safety risks to consumers are subjected to more stringent checks, regardless of their country of origin. SFA has in place an integrated system to ensure that both imported and domestically produced foods are safe for consumption. The system comprises control measures such as source accreditation, inspection and surveillance of food, laboratory analysis, food legislation and recall of food products, which safeguard food safety from farm to fork. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Singapore Food Agency (SFA)
|
|
