| Commodity: |
Corn / Maize |
| Traits: |
Thermostable alpha-amylase production |
| Name of product applicant: |
Syngenta Agro S.A. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
21/07/2021 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Organism subject to control:
Maize has a history of safe consumption and according to the intended use its allergenic and toxicological characteristics do not represent a concern for human or animal health.
Donor organisms:
The introduced genes come from:
- Microorganisms Thermococcales (amy797E)
- Escherichia coli strain K12 (pmi)
None of the elements present in the constructions used and expressed in this event has pathogenic characteristics for plants or animals.
Characterization of the event:
The SYN-E3272-5 maize event was obtained by Agrobacterium tumefaciens-mediated transformation of a line owned by Syngenta and has the following characteristic:
- Expression of an alpha-amylase enzyme called AMY797E, which acts by hydrolyzing α (1,4) glycosidic bonds in amylose and amylopectin.
Molecular characterization:
The insertion occurred at a single locus, it did not interrupt any gene or other genetic element of the maize genome, it is stable and is inherited according to the principles of Mendelian inheritance.
Compositional Analysis:
The composition studies presented identified some statistically significant differences between 3272 maize and non-transgenic controls for some analytes. These differences were not consistent between localities, the values always being within the ranges of the natural variability of corn reported in the literature. The results obtained show that the analyzed event is substantially equivalent in composition to its non-transgenic counterpart. Furthermore, it shows that the expression of the PMI and AMY797E proteins in corn plants does not result in unintended modifications in the normal biological processes of the plant.
Allergenic and Toxicological Characteristics:
The bioinformatic analysis performed by comparison in databases did not identify sequence homology between the newly expressed proteins with known allergens or toxins.
Other studies presented showed that the AMY797E protein is susceptible to digestion in simulated gastric fluids and that it does not cause harm to health in mice in an acute oral toxicity test, so it is considered unlikely to produce adverse health effects of humans and animals before the consumption of it.
On the other hand, the study of possible ORFs determined the absence of sequence similarity between the potential peptides and known allergens or toxins in databases.
Feeding studies with the whole food:
There is no evidence to support the need to request additional studies in animals or feeding trials using the complete food, taking into account that:
- No adverse effects, toxic and / or allergenic characteristics were observed for the AMY797E protein
- History of safe food use of PMI protein
- Lack of homology with allergens and toxins of AMY797E and PMI
- Compositional equivalence of the event.
- Absence of unintended effects.
According to the foregoing, based on currently available scientific knowledge and internationally accepted requirements and criteria, it is concluded that the SYN-E3272-5 maize event is as safe and no less nutritious than its conventional counterpart, and that, therefore, there are no objections to its approval for human and animal consumption. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministerio de Agroindustria
Contact person name: Andrés Maggi
Website:
Physical full address: Paseo Colón Avenue 367, 3° floor, City of Buenos Aires
Phone number: 54 11 5222 5986
Fax number:
Country introduction: In Argentina, the food and feed risk assessment process of transformation events, as the result of modern biotechnology, is carried out by the National Service for Agrifood Health and Quality (Senasa). The General Office of Biotechnology, is the area responsible for carrying out this task. It has an specific professional team and the advise of a Technical Advisory Committee composed of experts from several scientific disciplines representing different sectors involved in the production, industrialization, consumption, research and development of genetically modified organisms. Useful links
Relevant documents
Stacked events: Stacked events with all single events approved, are assessed as a new event, but with much less requirements, always on a case-by-case basis. Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: National Service for Agrifood Health and Quality (Senasa)
https://www.argentina.gob.ar/senasa
https://www.argentina.gob.ar/senasa/programas-sanitarios/biotecnologia
| Name of product applicant: |
Syngenta |
| Summary of application: |
Corn line 3272 has been genetically modified to express a thermostable α-amylase enzyme (AMY797E) for use in dry-grind fuel ethanol production in the United States. Amylase is used to hydrolyse starch into smaller sugar subunits, which is the first step in producing ethanol from plants. Amylases used for ethanol production need to be able to work at high temperatures and low calcium concentrations. Plants such as corn naturally contain amylases however these are destroyed when corn is subjected to the high processing temperatures necessary for ethanol production, making it necessary to add microbially-produced amylase preparations. The use of corn line 3272, expressing a highly thermostable amylase, bypasses this step. |
| Upload: |
|
| Date of authorization: |
13/03/2008 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
OECD BioTrack Product Database
|
| Summary of the safety assessment (food safety): |
|
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
Application A580 -Food derived from amylase - modified corn line 3272
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Food Standards Australia New Zealand
Contact person name:
Website:
Physical full address: Level 4, 15 Lancaster Place, Majura Park ACT 2609, Australia
Phone number: +61 2 6271 2222
Fax number: +61 2 6271 2278
Country introduction: Food Standards Australia New Zealand (FSANZ) is the regulatory agency responsible for the development of food standards in Australia and New Zealand. The main office (approximately 115 staff) is located in Canberra (in the Australian Capital Territory) and the smaller New Zealand office (approximately 10 staff) is located in Wellington on the North Island. Useful links
Relevant documents
Stacked events: FSANZ does not: Separately assess food from stacked event lines where food from the GM parents has already been approved; Mandate notification of stacked events by developers; Notify the public of stacked event ‘approvals’; List food derived from stacked event lines in the Code, unless the stacked event line has been separately assessed as a single line e.g. Application A518: MXB-13 cotton (DAS-21023-5 x DAS-24236-5)
No separate approval or safety assessment is necessary for foods derived from a stacked GM line that is the result of traditional breeding between a number of GM parent lines for which food has already been approved. Food from the parent lines must be listed in the Australia New Zealand Food Standards Code. The parent lines may contain any number of different genes. If food from any of the GM parent lines has not been approved, then a full pre-market safety assessment of food from the stacked line must be undertaken.
No separate approval is required for food derived from a line that is the product of a GM line, for which food has been approved, crossed traditionally with a non-GM line.
Where a single line containing a number of genes has been produced as a result of direct gene technology methods (rather than traditional crossing) then food derived from the line must undergo a full pre-market safety assessment before approval can be given Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Food Standards Australia New Zealand (FSANZ) (http://www.foodstandards.gov.au)
| Name of product applicant: |
Syngenta Seeds Ltda |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
03/02/2022 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Within the scope of Art. 14 of Law 11,105/05, CTNBio considered that the commercial release for planting genetically modified corn 3272 complies with the relevant norms and legislation that aim to guarantee the biosecurity of the environment, agriculture, human and animal health. Thus, provided the conditions described in the process and in this technical opinion are met, this activity is not potentially causing significant degradation of the environment or damage to human or animal health. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
Molecular traddicional methods. |
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
not applicable |
E-mail:
Organization/agency name (Full name): National Biosafety Technical Commission
Contact person name: Paulo Augusto Viana Barroso
Website:
Physical full address: SPO Area 5 Qd 3 Bl B S 10.1 Brasilia DF
Phone number: 556120335087
Fax number:
Country introduction: Brazil had the first biosafety law approved in 1995. After the identification of the need to improve the biosafety system of Brazilian genetically modified organisms, a new law was published. The Law 11.105 / 05 establishes a technical committee dedicated to the analysis of the safety aspects of genetically modified organisms and a council of ministers that is dedicated to the analysis of the socioeconomic aspects of the commercial release of genetically modified organisms. In this context, Brazil already has several commercial products that involve genetically modified organisms (plants, human and veterinary vaccines, microorganisms for fuel production) and products derived from new genetic modification techniques. Useful links
Relevant documents
Stacked events: At the discretion of, and upon consultation with, CTNBio, a new analysis and issuance of technical opinion may be released on GMOs containing more than one event, combined through classic genetic improvement and which have been previously approved for commercial release by CTNBio Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Dr. Paulo Augusto Viana Barroso (President of national Biosafety Commission)
| Name of product applicant: |
Syngenta Seeds Canada Inc. |
| Summary of application: |
Alpha-amylase corn event 3272 was developed through genetic modification techniques so that this corn produces a thermostable AMY797E alpha-amylase for use in the dry-grind ethanol production from corn grain. While event 3272-derived field corn lines are anticipated to be used mainly in fuel ethanol production in the United States, they may also be used like other field corn lines as feed for livestock animals and in the production of processed food products or ingredients, such as beverage alcohol and corn syrup.
The safety assessment performed by Food Directorate evaluators was conducted according to Health Canada's Guidelines for the Safety Assessment of Novel Foods. The assessment considered: how corn event 3272 was developed; how the composition and nutritional quality of corn grain derived from plants containing this event compare to non-modified corn; and what the potential is for food products derived from plants containing this event to be toxic or cause allergic reactions.
The Food Directorate has a legislated responsibility for pre-market assessment of novel foods and novel food ingredients as detailed in Division 28 of Part B of the Food and Drug Regulations (Novel Foods). Foods derived from alpha-amylase corn event are considered novel foods under the following part of the definition of novel foods: "c) a food that is derived from a plant, animal or microorganism that has been genetically modified such that
i.the plant, animal or microorganism exhibits characteristics that were not previously observed in that plant, animal or microorganism"
|
| Upload: |
|
| Date of authorization: |
13/03/2008 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
BioTrack Product Database
|
| Summary of the safety assessment (food safety): |
Please see decision document weblinks |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
Novel Foods Decision
Novel Feeds Decision
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Health Canada
Contact person name: Neil Strand
Website:
Physical full address: 251 Sir Frederick Banting Driveway, Tunney's Pasture, PL 2204A1
Phone number: 613-946-1317
Fax number:
Country introduction: Federal responsibility for the regulations dealing with foods sold in Canada, including novel foods, is shared by Health Canada and the Canadian Food Inspection Agency (CFIA). Health Canada is responsible for establishing standards and policies governing the safety and nutritional quality of foods and developing labelling policies related to health and nutrition. The CFIA develops standards related to the packaging, labelling and advertising of foods, and handles all inspection and enforcement duties. The CFIA also has responsibility for the regulation of seeds, veterinary biologics, fertilizers and livestock feeds. More specifically, CFIA is responsible for the regulations and guidelines dealing with cultivating plants with novel traits and dealing with livestock feeds and for conducting the respective safety assessments, whereas Health Canada is responsible for the regulations and guidelines pertaining to novel foods and for conducting safety assessments of novel foods.
The mechanism by which Health Canada controls the sale of novel foods in Canada is the mandatory pre-market notification requirement as set out in Division 28 of Part B of the Food and Drug Regulations.
Manufacturers or importers are required under these regulations to submit information to Health Canada regarding the product in question so that a determination can be made with respect to the product's safety prior to sale. The safety criteria for the assessment of novel foods outlined in the current guidance document (i.e. Canadian Guidelines for the Safety Assessment of Novel Foods) were derived from internationally established scientific principles and guidelines developed through the work of the Organization for Economic Cooperation and Development (OECD), Food and Agriculture Organisation (FAO), World Health Organisation (WHO) and the Codex Alimentarius Commission. These guidelines provide for both the rigour and the flexibility required to determine the need for notification and to conduct the safety assessment of the broad range of food products being developed. This flexibility is needed to allow novel foods and food products to be assessed on a case-by-case basis and to take into consideration future scientific advances. Useful links
Relevant documents
Stacked events: Food: Consistent with the definition of "novel food" in Division 28 of the Food and Drug Regulations, the progeny derived from the conventional breeding of approved genetically modified plants (one or both parents are genetically modified) would not be classified as a novel food unless some form of novelty was introduced into such progeny as a result of the cross, hence triggering the requirement for pre-market notification under Division 28. For example, notification may be required for modifications observed in the progeny that result in a change of existing characteristics of the plant that places those characteristics outside of the accepted range, or, that introduce new characteristics not previously observed in that plant (e.g. a major change has occurred in the expression levels of traits when stacked). In addition, the use of a wild species (interspecific cross) not having a history of safe use in the food supply in the development of a new plant line may also require notification to Health Canada. However, molecular stacks are considered new events and are considered to be notifiable as per Division 28.
Feed: Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Neil Strand, Section Head of Novel Foods
| Name of product applicant: |
SYNGENTA |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
27/01/2016 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Based on the risk assessment, it can be concluded that the event shows the same risks as its conventional counterpart. Therefore the National Technical Biosafety Committee for GMO use exclusively in Health and human consumption (CTNSalud) recommends its authorization. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministerio de salud y proteccion social
Contact person name: Daniel Rubio
Website:
Physical full address: Carrera 13 No. 32- 76 piso 12, Bogotá
Phone number: 330 5000 ext 1256
Fax number:
Country introduction: The 4525 decree of 2005, established the Ministry of Health and Social Protection as the competent authority for GMO for health and food purposes and creates the National Biosafety Technical Committee for GMO's used in health and food purposes (CTNSalud).
The CTNSalud is composed by the Ministry of Health and Social Protection, the National Food and Drug Surveillance Institute (INVIMA) and the Technology and Innovation Administrative Department (COLCIENCIAS). This committee is responsible for the assesment of risk assessments; to inquire for any additional information; assessment of any measurements in accordance to the Cartagena Protocol; and the recommendation for the authorization of GMO for health or food purposes. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Syngenta S.A |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
08/09/2021 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Based on the risk assessment, it can be concluded that the event shows the same risks as its conventional counterpart. Therefore, the National Technical Committee for GMO use exclusively in health and human consumption (CTNSalud) recommends its authorization. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministerio de salud y proteccion social
Contact person name: Daniel Rubio
Website:
Physical full address: Carrera 13 No. 32- 76 piso 12, Bogotá
Phone number: 330 5000 ext 1256
Fax number:
Country introduction: The 4525 decree of 2005, established the Ministry of Health and Social Protection as the competent authority for GMO for health and food purposes and creates the National Biosafety Technical Committee for GMO's used in health and food purposes (CTNSalud).
The CTNSalud is composed by the Ministry of Health and Social Protection, the National Food and Drug Surveillance Institute (INVIMA) and the Technology and Innovation Administrative Department (COLCIENCIAS). This committee is responsible for the assesment of risk assessments; to inquire for any additional information; assessment of any measurements in accordance to the Cartagena Protocol; and the recommendation for the authorization of GMO for health or food purposes. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
PT. Syngenta Seed Indonesia |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
30/12/2011 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Please refer to the document (in Indonesian) |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Indonesian Agency for Agricultural Research and De
Contact person name: Sustiprijatno
Website:
Physical full address: BB Biogen Jl Tentara Pelajar 3A Bogor 16111 Indonesia
Phone number: +622518333440
Fax number: +622518334420
Country introduction:
- Indonesia has ratified Protocol on Biosafety to the Convention on Biological Diversity (CBD) through the Indonesian Law No. 21 / 2004. In the implementation, biosafety assessment for GM products, based on Goverment Regulation Number 21 /2005, Indonesia has regulated GM products on several items including : product kinds and requrements, research and developement, product importation, product assessment, release and distribution, supervision and monitoring, and institution and financing. We have also Law for food No. 18 /2012 which also consists of regulation for GM food.
- Indonesia already have procedure /application on GMO biosafety assessment and National Authorized Institution who conducting the biosafety assessment . Each GM food should have authorization from Goverment before it can be released and distributed. An application for authorisation for new GM food should be submited to Biosafety Commision through related Ministry or authorised Non Departement Goverment Agency (LPND) . Biosafety Commision, then sends the application to the National Agency for Drug and Food Control (Badan POM) for technical team to evaluate the GM food safety. The recommendation by technical team will be sent back to Biosafety Commision. The recommendation and GM Food safety certificate will be released by Biosafety Commision to the applicant through related ministry or LPND.
Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: National Agency of Food and Drug Control (BPOM): http://www.pom.go.id/new/home/en
| Name of product applicant: |
Syngenta Seeds K.K. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
30/06/2010 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
OECD BioTrack Product Database
|
| Summary of the safety assessment (food safety): |
Please see the links below (in Japanese). |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
Food safety assessment performed by Food Safety Commission of Japan (in Japanese), Food
Food safety assessment performed by Food Safety Commission of Japan (in Japanese), Feed
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Food Safety Commission Secretariat,Cabinet Office,
Contact person name: Kojiro Yokonuma
Website:
Physical full address: Akasaka 5-2-20 Minato Ward,Tokyo,Japan
Phone number: 81 3 6234 1122
Fax number: 81 3 3584 7392
Country introduction: Safety assessments of GM foods are mandatory under the Food Sanitation Law in Japan. The Ministry of Health, Labour, and Welfare (MHLW) legally imposes safety assessments of GM foods so that those that have not undergone safety assessments would not be distributed in the country. MHLW receives application and requests the Food Safety COmmission of Japan (FSCJ) to evaluate the safety of GM foods in terms of human health. Safety assessments are carried out by FSCJ.
Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Syngenta Crop Protection Sdn. Bhd |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
10/03/2016 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
Department of Biosafety Malaysia
CBD Biosafety Clearing House
|
| Summary of the safety assessment (food safety): |
Please refer to the Risk Assessment Report. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
None |
E-mail:
Organization/agency name (Full name): Department of Biosafety Malaysia
Contact person name: Dr. Anita Anthonysamy
Website:
Physical full address: Department of Biosafety,
Ministry of Natural Resources, Environment and Climate Change
Level 4, Block F11, Complex F
Lebuh Perdana Timur, Precinct 1
62000 Putrajaya, Malaysia
Phone number: +60380917322
Fax number: +60380917371
Country introduction: GM food safety assessment is a requirement by law under the Biosafety Act 2007 in Malaysia. The National Biosafety Board reviews and makes decisions on events based on a scientific/technical risk assessment, policy considerations as well as public input. The decisions and its related documents made are publicly available through the Malaysian Department of Biosafety Website and the Convention of Biological Diversity Biosafety Clearing House. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Department of Biosafety, Ministry of Natural Resources, Environment and Climate Change Level 4, Block F11, Complex F Lebuh Perdana Timur, Precinct 1 62000 Putrajaya, Malaysia. Email: [email protected]. Url: www. biosafety.gov.my
Food Safety and Quality Division, Ministry of Health, Level 4, Menara Prisma, No. 26, Persiaran Perdana, Putrajaya, Malaysia, 62675. Phone: +603 88850797 Fax: +603 88850790 Email: [email protected]
| Name of product applicant: |
Syngenta Seeds, Inc. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
04/11/2008 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
UI OECD: SYN-E3272-5
During the risk assessment of this GMO based on existing knowledge to date, no toxic or allergic effects neither substantial nutritional changes are observed. The event is as safe as its conventional counterpart.
For more detail please find attached the risk assessment summary in this page.
|
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): CIBIOGEM
Contact person name: Dra. Consuelo López López
Website:
Physical full address: San Borja #938, Col. Del Valle • Del. Benito Juárez C.P. 03100, México, D.F.
Phone number: +52 (55) 53227700
Fax number:
Country introduction: México ha buscado garantizar la inocuidad de los productos biotecnológicos para el uso y consumo de su población.
Desde 1984 el artículo 282 bis 1 de la Ley General de Salud, contempló que la Secretaría de Salud debería regular aquellos productos biotecnológicos, o sus derivados, destinados al uso o consumo humano.
En un inicio, con fundamento en este artículo, la Secretaria de Salud evaluó la inocuidad alimentaria de productos biotecnológicos, para su comercialización con fines de uso o consumo humano. A partir de 2005, con la entrada en vigor de la Ley de Bioseguridad de Organismos Genéticamente Modificados (LBOGM), se realizó la adecuación de la regulación para dar lugar a la Autorización que es el acto administrativo mediante el cual la Secretaría de Salud, a través de la Comisión Federal para la Protección contra Riesgos Sanitarios (COFEPRIS), autoriza Organismos Genéticamente Modificados (OGMs), a efecto de que se pueda realizar su comercialización, así como su utilización con finalidades de Salud Pública o de Biorremediación.
Las facultades que corresponden a la Secretaría de Salud se estipulan en el artículo 16 de la LBOGM y lo relativo a la Autorizaciones se describe en los artículos 91 al 98 de dicha Ley.
Quienes pretendan obtener una Autorización para Comercialización e Importación de OGMs deben presentar ante COFEPRIS, una solicitud por escrito acompañada de la información a que se refiere los artículos 23 al 32 del Reglamento de la Ley de Bioseguridad de OGMs.
http://www.conacyt.gob.mx/cibiogem/images/cibiogem/normatividad/vigente/LBOGM.pdf
http://www.conacyt.gob.mx/cibiogem/images/cibiogem/normatividad/vigente/Reg_LBOGM.pdf
Courtesy translation
Mexico has sought to guarantee the safety of biotechnological products the use and consumption of its population. Since 1984, article 282 bis 1 from the General Law of Health, considered that the Secretary of Health should regulate those biotechnological products, or their derivatives, intended for food and feed use. Initially, the Secretary of Health evaluated the food safety of biotechnological products, based on this article, for commercialization with purposes of food, feed and processing. Subsequently in 2005, with the entry into force of the Law on Biosafety of Genetically Modified Organisms (LBOGM), the regulation was adapted to give rise to the Authorization, which is the administrative act through which the Secretary of Health, by means of the Federal Commission for the Protection Against Sanitary Risks (COFEPRIS), authorizes Genetically Modified Organisms (GMOs), to their commercialization, as well as their use for purposes of public health or bioremediation.
The faculties that correspond to the Secretary of Health are stipulated in Article 16 of the LBOGM and what is related to the Authorizations is described in Articles 91 to 98 of this Law. Those who seek to obtain an Authorization for GMOs merchandising and importation, must present to COFEPRIS, a written request accompanied by the information referred into articles 23 to 32 of the Regulation of the Law on Biosafety of Genetically Modified Organisms.
http://www.conacyt.gob.mx/cibiogem/images/cibiogem/normatividad/vigente/LBOGM.pdf
http://www.conacyt.gob.mx/cibiogem/images/cibiogem/normatividad/vigente/Reg_LBOGM.pdf Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Syngenta |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
13/06/2008 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
OECD BioTrack Product Database
|
| Summary of the safety assessment (food safety): |
FSANZ has completed a comprehensive safety assessment of food derived from amylase modified corn line 3272, as required under Standard 1.5.2 in the Code. The assessment
included consideration of (i) the genetic modification to the plant; (ii) the potential toxicity and allergenicity of the novel proteins; and (iii) the composition of amylase-modified corn line 3272 compared with that of conventional corn. In addition, due to the unique characteristics of this particular genetic modification, the assessment also considered the human nutritional impact as well as the impact on food technological processes.
The assessment of this application identified no public health and safety concerns. On the basis of the available evidence, including detailed studies provided by the Applicant, food derived from amylase-modified corn line 3272 is considered to be as safe and as wholesome as food derived from other commercial corn varieties. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
Application A580 -Food derived from amylase - modified corn line 3272
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministry for Primary Industries
Contact person name: john vandenbeuken
Website:
Physical full address: Pastoral House, 25 The Terrace, Wellington, 6012
Phone number: 0298942581
Fax number:
Country introduction: New Zealand and Australia share a joint food regulation system for the composition of labelling of most foods. Food Standards Australia New Zealand (FSANZ) is the regulatory agency responsible for the development of the joint food standards in Australia and New Zealand. The main office (approximately 120 staff) is located in Canberra (in the Australian Capital Territory) and the smaller New Zealand office (approximately 15 staff) is located in Wellington on the North Island. Useful links
Relevant documents
Stacked events: FSANZ does not: Separately assess food from stacked event lines where food from the GM parents has already been approved; Mandate notification of stacked events by developers; Notify the public of stacked event ‘approvals’; List food derived from stacked event lines in the Code, unless the stacked event line has been separately assessed as a single line e.g. Application A518: MXB-13 cotton (DAS-21023-5 x DAS-24236-5) Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
SYNGENTA PARAGUAY S.A. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
24/02/2022 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
The food and feed safety assessment was performed following the CODEX Guidelines |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministerio de Agricultura y Ganadería
Contact person name: Santiago Bertoni
Website:
Physical full address: Yegros 437 entre 25 de mayo y Cerro Cora
Phone number: +595 981 256262
Fax number:
Country introduction: The agricultural sector is one of the economic pillars of Paraguay in its contribution to the GDP, with the main crops being soybean, cassava, maize, wheat, sugar cane, and cotton. It should also be noted that Paraguay is the world’s fourth exporter of soybean. In 2020, the area planted with crops was 4.67 million hectares and consisted of soybean (3.56 million hectares), maize (1.08 million hectares), and cotton (18,000 hectares). Agricultural biotechnology was first regulated in Paraguay in 1997. In 2012, the system was adjusted through the creation of the National Agricultural and Forestry Biosafety Commission (CONBIO), “with the mission to manage, analyze, and issue recommendations on all matters related to the introduction, confined field trials, pre-commercial and commercial release, and other intended uses of GE crops” Almost 94% of the soybean, 36% of the maize, and 56% of the cotton planted in the country are GE. Useful links
Relevant documents
Stacked events: When a stacked event is approved, all possible combinations are approved. Previously evaluated single events are not reevaluated in stacks. Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: In 2012, the system was adjusted through the creation of the National Agricultural and Forestry Biosafety Commission (CONBIO), “with the mission to manage, analyze, and issue recommendations on all matters related to the introduction, confined field trials, pre-commercial and commercial release, and other intended uses of GE crops”. Additional information https://conbio.mag.gov.py/
| Name of product applicant: |
SYNGENTA PARAGUAY S.A. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
24/02/2022 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
The food and feed safety assessment was performed following the CODEX Guidelines |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministerio de Agricultura y Ganadería
Contact person name: Santiago Bertoni
Website:
Physical full address: Yegros 437 entre 25 de mayo y Cerro Cora
Phone number: +595 981 256262
Fax number:
Country introduction: The agricultural sector is one of the economic pillars of Paraguay in its contribution to the GDP, with the main crops being soybean, cassava, maize, wheat, sugar cane, and cotton. It should also be noted that Paraguay is the world’s fourth exporter of soybean. In 2020, the area planted with crops was 4.67 million hectares and consisted of soybean (3.56 million hectares), maize (1.08 million hectares), and cotton (18,000 hectares). Agricultural biotechnology was first regulated in Paraguay in 1997. In 2012, the system was adjusted through the creation of the National Agricultural and Forestry Biosafety Commission (CONBIO), “with the mission to manage, analyze, and issue recommendations on all matters related to the introduction, confined field trials, pre-commercial and commercial release, and other intended uses of GE crops” Almost 94% of the soybean, 36% of the maize, and 56% of the cotton planted in the country are GE. Useful links
Relevant documents
Stacked events: When a stacked event is approved, all possible combinations are approved. Previously evaluated single events are not reevaluated in stacks. Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: In 2012, the system was adjusted through the creation of the National Agricultural and Forestry Biosafety Commission (CONBIO), “with the mission to manage, analyze, and issue recommendations on all matters related to the introduction, confined field trials, pre-commercial and commercial release, and other intended uses of GE crops”. Additional information https://conbio.mag.gov.py/
| Name of product applicant: |
Syngenta Philippines |
| Summary of application: |
Syngenta developed corn plant which is derived from Corn 3272 expressing a synthetic thermostable alpha amylase protein, AMY797E containing the amy797E gene. Alpha amylases are enzymes that catalyze the hydrolysis of starch into soluble sugars. The amy797E gene is a chimeric gene derived from sequences of three alpha-amylase genes originating from three hyperthermophilic microorganisms of the archaeal order Thermococcales.
The plants also express the selectable marker phosphomannose isomerase (PMI) containing the pmi gene. This gene represents the manA gene from Escherichia coli. Corn expressing pmi can utilize mannose as a primary carbon source.
|
| Upload: |
|
| Date of authorization: |
07/02/2013 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Syngenta Philippines, Inc. submitted applications to the Bureau of Plant Industry (BPI), requesting for biosafety permit under Administrative Order (AO) No. 8 for Corn 3272 for direct use as food, feed, or for processing. Corn 3272 has been transformed with a synthetic amy797E gene whose expression produces the thermostable AMY797E alpha amylase protein.
Corn 3272 has been evaluated according to BPI’s safety assessment by concerned agencies of the Department of Agriculture (DA): [Bureau of Animal Industry (BAI) and Bureau of Agriculture, Fisheries and Product Standards (BAFPS)] and a Scientific and Technical Review Panel(STRP). The process involves an intensive analysis of the nature of the genetic modification together with the consideration of general safety issues, toxicological issues and nutritional issues associated with modified corn.
The petitioner/applicant published the Public Information Sheet (PIS) of the said application in two widely circulated newspapers for public comment/review. During the 30-day comment period, BPI had not received negative comments on the said application. Review of results of evaluation by the BPI Biotech Core Team in consultation with DA-Biotechnology Advisory Team (DA-BAT) completed the
approval process.
|
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Bureau of Plant Industry
Contact person name: Geronima P. Eusebio
Website:
Physical full address: San Andres St., Malate, Manila
Phone number: 632 404 0409 loc 203
Fax number:
Country introduction: In 1987, scientists from the University of the Philippines Los Banos (UPLB) and the International Rice Research Institute (IRRI), the Quarantine Officer of the Bureau of Plant Industry (BPI), and the Director for Crops of the Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), recognizing the potential harm of the introduction of exotic species and genetic engineering, formed a committee and formulated the biosafety protocols and guidelines for genetic engineering and related research activities for UPLB and IRRI researchers. The committee went on to draft a Philippine biosafety policy, which was submitted to the Office of the President. On October 15, 1990, recognizing the potential for modern biotechnology both in improving the lives of the people and in creating hazards if not handled properly, President Corazon C. Aquino issued Executive Order 430 creating the National Committee on Biosafety of the Philippines (NCBP) that will formulate, review and amend national policy on biosafety and formulate guidelines on the conduct of activities on genetic engineering. The NCBP is comprised of representative of the Departments of Agriculture (DA); Environment and Natural Resources (DENR); Health (DOH); and Science and Technology (DOST), 4 scientists in biology, environmental science, social science and physical science; and 2 respected members of the community. On July 16, 2001, President Gloria Macapagal-Arroyo issued the Policy Statement on Modern Biotechnology, reiterating the government policy on promoting the safe and responsible use of modern biotechnology. On April 3, 2002, Department of Agriculture Administrative Order No. 8, Series of 2002 was issued implementing the guidelines for importation and release into the environment of Plants and Plant Products Derived from the Use of Modern Biotechnology. On March 17, 2006, President Gloria Macapagal-Arroyo issued Executive Order No.514 Establishing the National Biosafety Framework, prescribing guidelines for its implementation, reorganizing the National Committee on Biosafety of the Philippines, and for other purposes. On December 8, 2015, the Philippine Supreme Court declared DA AO8 null and void and any application for contained use, field testing, propagation and commercialization, and importation of GMOs was temporarily enjoined. In response to the nullification of DA AO8, the Technical Working Group composed of representatives from the Departments of Agriculture (DA), Science and Technology (DOST), Environment and Natural Resources (DENR), Health (DOH), and Interior and Local Government (DILG) drafted the Joint Department Circular No. 1, Series of 2016 (JDC No.1, S2016) titled 'Rules and Regulations for the Research and Development, Handling and Use, Transboundary Movement, Release into the Environment, and Management of Genetically-Modified Plant and Plant Products Derived from the Use of Modern Biotechnology'. There were series of meeting and five public consultations conducted before the JDC No.1, S2016 was approved and signed by the Secretaries of the abovementioned agencies on March 7, 2016 and took effect on April 15, 2016. Under this Circular, more government agencies were involved such as the Department of Science and Technology (DOST) to regulate applications for contained use and confined test of regulated articles; Department of Agriculture (DA) to evaluate applications for field trial, commercial propagation and transboundary movement of regulated articles; Department of Environment and Natural Resources (DENR) to evaluate environmental risks and impacts of regulated articles; Department of Health (DOH) to evaluate of environmental health impacts of regulated articles; and Department of the Interior and Local Government (DILG) to supervise public consultation during field trial.
Useful links
Relevant documents
Stacked events: Gene stacking in plants can be conferred either through genetic engineering or conventional breeding A full risk assessment as to food and feed or for processing shall be conducted to plant products carrying stacked genes conferred through genetic engineering or conventional breeding, where the individual traits have no prior approval for direct use as food and feed or processing from the Bureau of Plant Industry (BPI) A desktop or documentary risk assessment on the possible or expected interactions between the genes shall be conducted for stacked gene products with multiple traits conferred through conventional breeding and individual events granted prior approval by the Bureau of Plant Industry.
Plant Products Carrying Stacked Genes Conferred Through (a) Genetic Engineering or b) Conventional Breeding, with Individual Traits That Have No Prior Approval:
A full risk assessnent as to food and feed or processing shall be conducted,consistent with Part V of AO No. 8,"Approval Process For the Importation of Regulated Articles for Direct Use as Food and Feed or For Processing for plant products with multiple traits conferred through:
(a) genetic engineering, or
(b) conventional breeding, where the individual traits have no prior approval from the Bureau of Plant Industry (BPI) for direct use as food and feed or processing.
Plant Products Carrying Stacked Genes Conferred through Conventional Breeding:
For plant products with multiple traits conferred through conventional breeding,with all individual events granted prior approval and included in the Approval Registry, a notlfication shall be submitted by the technology developer to the BPI, which shall conduct an evaluation in accordance with the relevant criteria in Annex I of this Memorandum Circular. The list of data contained in Annex I will not preclude the inclusion of other issues and concerns that will be raised by the BPI and the Scientific and Technical Review Panel (STRP) during the course of the desktop review.
Notificatlon Requirement for Plant Products Carrying Stacked Genes
All technology developers shall submit a notification to the Bureau of Plant Industry of their developed plant products carrying stacked genes and shall be required to comply with the relevant approval process listed above.
The Bureau of Plant Industry shall issue a certiflcate as to the approval of the stacked gene product and shall likewise include the transformation event in the official approval registry of plant products for food and feed or processing. Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Bureau of Plant Industry 692 San Andres St, Malate, Manila 1004
| Name of product applicant: |
Syngenta Korea |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
04/05/2011 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Please see the link below(in Korean). |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministry of Food and Drug Safety
Contact person name:
Website:
Physical full address: Osong Health Technology Administration Complex, 187, Osongsaengmyeong 2-ro, Osong-eup, Cheongwon-gun, Chungcheonbuk-do, 363-700, Korea
Phone number: 82-43-719-2360
Fax number:
Country introduction:
Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Syngenta Seeds Inc |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
05/04/2010 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Expert assessment of the data provided by the applicant, and results of complex
biomedical research of GM maize line 3272, synthesizing alpha-amylase
enzyme, by the Russian authorities demonstrate the absence of any toxic,genotoxic, sensitizing, immunomodulating, or allergenic effect in this maize
line, as well as its composition equivalence to its traditional counterpart.
In accordance with the Federal law of March 30, 1999, No.52-FZ “On
Sanitary and Epidemiological Safety of the Population”, GM maize line 3272,
synthesizing alpha-amylase enzyme, has registered for food use, and can be
safely used on the territory of the Russian Federation, imported to the territory
of the Russian Federation, and placed on the market without restrictions
(State Registration Certificate No. 77.99.26.11.Y.2009.4.10 of April 5, 2010).
More information is on P. 255-272 of monograph ”Genetically Modified Food Sources. Safety Assessment and Control”, published by Elsevier Inc. Academic Press in 2013,
the uploaded file.
|
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): FSBI «Institute of Nutrition» RAMS
Contact person name: Nadezhda Tyshko
Website:
Physical full address: 109240, Russia, Moscow, Ustinsky Proezd, 2/14
Phone number: +7(495)698-53-64
Fax number:
Country introduction: The development of the GMO safety assessment currently used in the Russian Federation started in 1995–1996. The methodological approaches to comprehensive complex medical and biological assessment of GMOs were developed in the Russian Federation with due regard for international and national experience as well as new scientific approaches based on the achievements of contemporary fundamental science: genomic and proteomic analysis, detection of DNA damage or mutagenic activity, identification of products of free-radical modifications of DNA or other sensitive biomarkers. GMO safety assessment is carried out for the state registration. Any novel food derived from plant GMO produced in Russia or imported into Russia for the first time is subject to the state registration . Guidance for safety assessment is specified in MU 2.3.2.2306-07 “Medico-Biological Safety Assessment of Plant Genetically Modified Organisms”. According to the accepted regulations,the human health assessment of a novel GMO to be placed on the domestic market includes the following: ■ Molecular assessment includes analysis of genetic construction, genetic modification method, and the gene expression level. ■ Technological assessment includes determination of organoleptic and functional properties, analysis of technological characteristics of the finished products. ■ Human health safety assessment includes several sections of required assessments: analysis of compositional equivalence and toxicological,genotoxicological, and allergological safety studies. ■ Methods for identification include qualitative and quantitative assay of GMO in food (studies targeted at determination of correspondence of these methods to those used in Russia in order to provide monitoring of use and labeling of GM food). The list and the scope of required studies is determined on the basis of analysis of information of the GMO submitted for registration; however, the above-mentioned studies are required. If significant changes in the GMO’s genome, proteome, or metabolome are shown, additional studies may be required to determine: biological value and absorbency reproductive effect; gonadotoxic, embryotoxic, teratotoxic effect; potential carcinogenic effect; lifetime, etc. Useful links
Relevant documents
Stacked events: Russia follows the national Methodical Guidelines 2.3.2.3388-16 “Medical and biological safety assessment of genetically modified stack events of plant origin ”
Our position regarding GM stacks registration is very close to the EU approach.
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Federal Research Centre of nutrition and biotechnology Viktor A. Tutelyan Ustinsky proezd, 2/14 109240 Moscow, RUSSIA E-mail: [email protected] Tel.:+7 495 698-53-60
| Name of product applicant: |
Syngenta |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
22/10/2018 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Corn line SYN-E3272-5 has been genetically modified for use in dry-grind ethanol production. It produces a heat-stable α-amylase enzyme which retains its activity during the high temperatures required for dry-grind ethanol production. The GM corn is intended primarily for industrial uses, however the ethanol produced may also be used for food applications. SYN-E3272-5 contains two novel genes. The first, the amy797E gene, encodes the thermostable AMY797E α-amylase enzyme which catalyses the hydrolysis of starch by the internal α-1,4-glucosidic bonds into dextrins, maltose and glucose. The amy797E gene encoded protein was selected for further development due to its thermostability, catalytic activity and reduced dependency on calcium under acidic conditions. These properties are important for the commercial application of α-amylase in the enzymatic hydrolysis of starch in dry-grind ethanol production from corn. The second gene, pmi (manA), derived from Escherichia coli, encodes the enzyme phosphomannose isomerase (PMI). The pmi gene is used as a selectable marker gene in the corn transformation process. Molecular and genetic analyses indicate that the transferred genes are stably integrated into the plant genome at one insertion site and are stably inherited from one generation to the next.
SYN-E3272-5 expresses two novel proteins – the enzymes AMY797E and PMI. The evidence indicates that both proteins are non-toxic and have limited potential to be allergenic in humans. The detailed compositional studies indicate that food derived from SYN-E3272-5 is equivalent in composition to food from non-GM corn varieties. Minor differences in composition were consistent with normal variation for corn and would not be expected to have any nutritional impact. On the basis of the data provided, and other available information, food derived from corn line SYN-E3272-5 can be considered as safe as food derived from other corn varieties. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Singapore Food Agency (SFA)
Contact person name: Dr Tan Yong Quan
Website:
Physical full address: 52 Jurong Gateway Road 14-01 JEM Office Tower Singapore 608550
Phone number: (65)68052750
Fax number:
Country introduction: The Singapore Food Agency (SFA) is a Statutory Board established under the Ministry of Sustainability and the Environment (MSE) to oversee food safety and security. SFA’s mission is to ensure and secure a supply of safe food. SFA adopts a risk-based approach to food safety. Foods with foodborne hazards that may pose potential food safety risks to consumers are subjected to more stringent checks, regardless of their country of origin. SFA has in place an integrated system to ensure that both imported and domestically produced foods are safe for consumption. The system comprises control measures such as source accreditation, inspection and surveillance of food, laboratory analysis, food legislation and recall of food products, which safeguard food safety from farm to fork. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Singapore Food Agency (SFA)
| Name of product applicant: |
Syngenta Seeds (Thailand) Limited. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
04/12/2022 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
The food safety assessment performed by the National Center for Genetic Engineering and Biotechnology (BIOTEC) as advisory and technical arm of Thai FDA. BIOTEC conduct food safety assessment according to codex guideline and based on the safety data and information provided by the applicant (as specified in Annex 2 attached to Notification of the Ministry of Public Health No.431). According to the existing scientific data and information available during the safety assessment, it is concluded that the maize event 3272 is substantially equivalent to its conventional counterpart in terms of morphology, nutrition, toxicity and allergenicity. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): National Burequ of Agricultural Commodity and Food
Contact person name: Director of Office of Standard Development
Website:
Physical full address: 50 Phahonyothin Rd., Lardyao, Chathuchak, Bangkok 10900
Phone number: +6625612277 ext.1401
Fax number: +6625613373
Country introduction: National Bureau of Agricultural Commodity and Food Standards (ACFS) is a governmental agency under the Ministry of Agriculture and Cooperatives (MOAC) responsible for the development of national agricultural and food standards. The Agricultural Standards Act B.E. 2551 (2008) establishes the mechanisms for the development of Thai Agricultural Standards (TAS) as either voluntary or mandatory standards. This is based on scientific data, consumer’s health and fair trade. Within the TAS, there are four standards relating GM food assessment, namely Principle for the Risk Analysis of Foods Derived from Biotechnology (TAS 9010-2006), Assessment of Possible Allergenicity (TAS 9011-2006), Guideline for the Conduct of Food Safety Assessment of Foods Derived from Recombinant-DNA Plants (TAS 9012-2006) and Guideline for the Conduct of Food Safety Assessment of Foods Produced Using Recombinant-DNA Microorganisms (TAS 9013-2006). These standards are adapted from relevant Codex standards. Safety assessment for imported GM crops and foods is done by the cooperation of the Food and Drug Administration (FDA) and the National Center for Genetic Engineering and Biotechnology (BIOTEC)via the Committees relating National Committees to consider technical and political issues. The Committees comprise representatives from all relevant governmental and non-governmental key sectors including experts on genetic modification, toxicity and others.
The safety assessment process of GM food in Thailand is on a voluntary basis. According to the current laws and regulations, there is no approval authority. Useful links
Relevant documents
Stacked events: The safety assessment for stacked events is divided into two patterns. The first pattern is for stacked events whose GM parents have never approved by FDA or other competent authority. Those stacked events shall be fully assessed in line with GM foods. Another pattern is introduced for the safety assessment of stacked event lines where from GM parents had already been approved. In the second pattern, the information of the parents could be used for consideration, as appropriate. However, the information relevant to interaction between genes and new proteins of stacked event should be mainly taken into account. Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Food and Drug Administration (FDA) and National Center for Genetic Engineering and Biotechnology (BIOTEC)
| Name of product applicant: |
Syngenta Seeds, Inc. |
| Summary of application: |
Corn
Trait 1 Added Protein: AMY797E alpha-amylase
Source: Three microbes from order Thermococcales
Intended Effect: Alpha-amylase expression
|
| Upload: |
|
| Date of authorization: |
07/07/2007 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Please consult the FDA website links below. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
FDA's webpage regarding this variety
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Food and Drug Administration
Contact person name: Jason Dietz
Website:
Physical full address: 5100 Paint Branch Parkway, College Park MD 20740
Phone number: 240-402-2282
Fax number:
Country introduction: The United States is currently in the process of populating this database. The Food and Drug Administration regulates food and feed (food for humans and animals) from genetically engineered crops in conjunction with the Environmental Protection Agency (EPA). EPA regulates pesticides, including those that are plant incorporated protectants genetically engineered into food crops, to make sure that pesticide residues are safe for human and animal consumption and do not pose unreasonable risks of harm to human health or the environment. FDA In the Federal Register of May 29, 1992 (57 FR 22984), FDA published its "Statement of Policy: Foods Derived from New Plant Varieties" (the 1992 policy). The 1992 policy clarified the agency's interpretation of the application of the Federal Food, Drug, and Cosmetic Act with respect to human and animal foods derived from new plant varieties and provided guidance to industry on scientific and regulatory issues related to these foods. The 1992 policy applied to all foods derived from all new plant varieties, including varieties that are developed using genetic engineering (also known as recombinant deoxyribonucleic acid (rDNA) technology). In the 1992 policy, FDA recommended that developers consult with FDA about foods from genetically engineered plants under development and developers have routinely done so. In June 1996, FDA provided additional guidance to industry on procedures for these consultations (the consultation procedures). These procedures describe a process in which a developer who intends to commercialize food from a genetically engineered plant meets with the agency to identify and discuss relevant safety, nutritional, or other regulatory issues regarding the genetically engineered food and then submits to FDA a summary of its scientific and regulatory assessment of the food. FDA evaluates the submission and if FDA has questions about the summary provided, it requests clarification from the developer. At the conclusion of the consultation FDA responds to the developer by letter. The approach to the safety assessment of genetically engineered food recommended by FDA during consultations, including data and information evaluated, is consistent with that described in the Codex Alimentarius Guideline for the Conduct of Food Safety Assessment of Foods Derived from Recombinant-DNA Plants. EPA The safe use of pesticidal substances is regulated by EPA. Food from a genetically engineered plant that is the subject of a consultation with FDA may contain an introduced pesticidal substance, also known as a plant-incorporated protectant (PIP), that is subject to food (food for humans and animals) safety and environmental review by EPA. PIPs are pesticidal substances produced by plants and the genetic material necessary for the plant to produce the substance. Both the PIP protein and its genetic material are regulated by EPA. When assessing the potential risks of PIPs, EPA requires studies examining numerous factors, such as risks to human health, non-target organisms and the environment, potential for gene flow, and insect resistance management plans, if needed. In regulating PIPs, decisions are based on scientific standards and input from academia, industry, other Federal agencies, and the public. Before the first PIP product was registered in 1995, EPA required that PIP products be thoroughly tested against human safety standards before they were used on human food and livestock feed crops. EPA scientists assessed a wide variety of potential effects associated with the use of PIPs, including toxicity, and allergenicity. These potential effects were evaluated in light of the public's potential exposures to these pesticides, taking into account all potential combined sources of the exposure (food, drinking water, etc.) to determine the likelihood that a person exposed at these levels would be predisposed to a health risk. Based on its reviews of the scientific studies and often peer reviews by the Federal Insecticide, Fungicide and Rodenticide Scientific Advisory Panel, EPA determined that these genetically engineered PIP products, when used in accordance with approved label directions and use restrictions, would not pose unreasonable risk to human health and the environment during their time-limited registration. Useful links
Relevant documents
Stacked events: Stacked events that are each plant incorporated protectants, as defined by the Environmental Protection Agency, must be registered by the Envriornmental Protection Agency before they can be commercialized. Food/feed safety asssessment of single events are generally sufficient to ensure the safety of food/feed from stacked events. Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
|
|
