Food safety and quality
| share
 

OECD Unique Identifier details

MON-87403-1
Commodity: Corn / Maize
Traits: Increased ear biomass at R1 developmental stage
European Union
Name of product applicant: Monsanto
Summary of application:

The genetically modified MON-874Ø3-1 maize was developed to increase ear biomass at early reproductive phase through the expression of the AtHB17Δ113 protein (encoded by a gene from Arabidopsis thaliana).

Upload:
Date of authorization: 26/07/2019
Scope of authorization: Food and feed
Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): EU Register of authorised GMOs
Summary of the safety assessment (food safety):
Please see the EU relevant links below.
Upload:
Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained:
Method for detection: Event specific real-time quantitative PCR based method for detection of the genetically modified maize MON-874Ø3-1. Reference material: AOCS 0216-A is accessible via the American Oil Chemists Society. The relevant links are provided below.
Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: Method for detection
Reference Material
Opinion of the European Food Safety Authority
Upload:
Authorization expiration date (a blank field means there is no expiration date) 28/07/2029
E-mail:
Organization/agency name (Full name):
European Union
Contact person name:
Alexandre Huchelmann
Website:
Physical full address:
European Commission B232 04/106 1047 Brussels
Phone number:
3222954092
Fax number:
Country introduction:

The process for authorising a new GMO is based on the EU regulation on GM food and feed (1829/2003). An application for authorising food or feed consisting of or made from a GMO must be submitted to the national authorities. The national authority then sends the application to the European Food Safety Agency (EFSA) for a risk assessment. EFSA then makes the application summary available to the public. No matter where in the EU the company applies, EFSA assesses the risks the GMO presents for the environment, human health and animal safety. If the application covers cultivation, EFSA delegates the environmental risk assessment to an EU country which sends EFSA its risk assessment report. After performing the risk assessment, EFSA submits its scientific opinion to the European Commission and to EU countries. The opinion is made available to the public, except for certain confidential aspects. Once EFSA publishes its risk assessment, the public has 30 days to comment on the Commission website for applications under Reg. 1829/2003, and on the Joint Research Centre website on the assessment report of the "lead" EU country for applications under Directive 2001/18. Within 3 months of receiving EFSA's opinion, the Commission grants or refuses the authorisation in a proposal. If it differs from EFSA’s opinion, it must explain why. National representatives approve the Commission’s proposal by qualified majority in: (1) The Standing Committee on the Food Chain and Animal Health if the application was submitted under Reg. 1829/2003; (2) The Regulatory Committee under Directive 2001/18/EC if the application was submitted under Dir. 2001/18. The proposal is adopted if the Committee agrees with it. If there is no opinion, the Commission may summon an Appeal Committee where EU countries can adopt or reject the proposal. If the Appeal Committee makes no decision, the Commission may adopt its proposal. Authorisations are valid for 10 years (renewable).

Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
Australia
Name of product applicant: Monsanto Australia Ltd
Summary of application:

Monsanto Australia Limited has submitted an application to FSANZ to vary Schedule 26 in the Australia New Zealand Food Standards Code (the Code) to include food from a new genetically modified (GM) corn line with OECD Unique Identifier MON-87403-1 (referred to as MON87403). The corn has been modified to have increased ear biomass at an early reproductive phase compared to conventional corn.


 


This modification is achieved through expression of a truncated ATHB17 (Arabidopsis thaliana homeobox-leucine zipper protein 17) transcription factor encoded by the ATHB17 gene from Arabidopsis thaliana. The truncated form (designated ATHB17Δ113) is missing the first 113 N-terminal amino acids of the wild-type protein and modulates certain pathways in the corn ear leading to increased partitioning of photosynthate and hence increased growth at an early stage and therefore increased grain yield at harvest..


 


The Applicant has stated that MON87403 is not intended to be a stand-alone product and will be crossed by conventional breeding with other approved GM corn lines (a process known as ‘stacking’).


 


The Applicant states the intention is that any lines containing the MON-87403-1 event will be grown in North America, and approval for cultivation in Australia or New Zealand is not being sought. Therefore, if approved, food derived from this line may enter the Australian and New Zealand food supply as imported food products.






 



Upload:
Date of authorization: 21/04/2016
Scope of authorization: Food
Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): OECD BioTrack Product Database
Summary of the safety assessment (food safety):
Upload:
Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained:
Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: A1114 – Food derived from High Yield Corn Line MON87403
Upload:
Authorization expiration date (a blank field means there is no expiration date)
E-mail:
Organization/agency name (Full name):
Food Standards Australia New Zealand
Contact person name:
Website:
Physical full address:
Level 4, 15 Lancaster Place, Majura Park ACT 2609, Australia
Phone number:
+61 2 6271 2222
Fax number:
+61 2 6271 2278
Country introduction:

Food Standards Australia New Zealand (FSANZ) is the regulatory agency responsible for the development of food standards in Australia and New Zealand. The main office (approximately 115 staff) is located in Canberra (in the Australian Capital Territory) and the smaller New Zealand office (approximately 10 staff) is located in Wellington on the North Island.

Useful links
Relevant documents
Stacked events:

FSANZ does not: Separately assess food from stacked event lines where food from the GM parents has already been approved; Mandate notification of stacked events by developers; Notify the public of stacked event ‘approvals’; List food derived from stacked event lines in the Code, unless the stacked event line has been separately assessed as a single line e.g. Application A518: MXB-13 cotton (DAS-21023-5 x DAS-24236-5)

No separate approval or safety assessment is necessary for foods derived from a stacked GM line that is the result of traditional breeding between a number of GM parent lines for which food has already been approved. Food from the parent lines must be listed in the Australia New Zealand Food Standards Code. The parent lines may contain any number of different genes. If food from any of the GM parent lines has not been approved, then a full pre-market safety assessment of food from the stacked line must be undertaken.

No separate approval is required for food derived from a line that is the product of a GM line, for which food has been approved, crossed traditionally with a non-GM line.

Where a single line containing a number of genes has been produced as a result of direct gene technology methods (rather than traditional crossing) then food derived from the line must undergo a full pre-market safety assessment before approval can be given

Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:

Food Standards Australia New Zealand (FSANZ) (http://www.foodstandards.gov.au)

New Zealand
Name of product applicant: Monsanto Australia Ltd
Summary of application:

Monsanto Australia Limited has submitted an application to FSANZ to vary Schedule 26 in the Australia New Zealand Food Standards Code (the Code) to include food from a new genetically modified (GM) corn line with OECD Unique Identifier MON-87403-1 (referred to as MON87403). The corn has been modified to have increased ear biomass at an early reproductive phase compared to conventional corn.


This modification is achieved through expression of a truncated ATHB17 (Arabidopsis thalianahomeobox-leucine zipper protein 17) transcription factor encoded by the ATHB17 gene from Arabidopsis thaliana. The truncated form (designated ATHB17Δ113) is missing the first 113 N-terminal amino acids of the wild-type protein and modulates certain pathways in the corn ear leading to increased partitioning of photosynthate and hence increased growth at an early stage and therefore increased grain yield at harvest.


The Applicant has stated that MON87403 is not intended to be a stand-alone product and will be crossed by conventional breeding with other approved GM corn lines (a process known as ‘stacking’).


The Applicant states the intention is that any lines containing the MON-87403-1 event will be grown in North America, and approval for cultivation in Australia or New Zealand is not being sought. Therefore, if approved, food derived from this line may enter the Australian and New Zealand food supply as imported food products.


 

Upload:
Date of authorization: 07/06/2016
Scope of authorization: Food
Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): OECD BioTrack Product Database
Summary of the safety assessment (food safety):
In conducting a safety assessment of food derived from MON87403, a number of criteria have been addressed including: a characterisation of the transferred gene sequences, their origin, function and stability in the corn genome; the changes at the level of DNA, and protein in the whole food; compositional analyses; and evaluation of intended and unintended changes. No potential public health and safety concerns have been identified in the assessment of high yield corn line MON87403. On the basis of the data provided in the present Application,and other available information, food derived from MON87403 is considered to be as safe for human consumption as food derived from conventional corn varieties.
Upload:
Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained:
Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: A1114 – Food derived from High Yield Corn Line MON87403
Upload:
Authorization expiration date (a blank field means there is no expiration date)
E-mail:
Organization/agency name (Full name):
Ministry for Primary Industries
Contact person name:
Fiapaipai Auapaau
Website:
Physical full address:
Pastoral House, 25 The Terrace, Wellington, 6012
Phone number:
+6448314946
Fax number:
Country introduction:

New Zealand and Australia share a joint food regulation system for the composition of labelling of most foods. Food Standards Australia New Zealand (FSANZ) is the regulatory agency responsible for the development of the joint food standards in Australia and New Zealand. The main office (approximately 120 staff) is located in Canberra (in the Australian Capital Territory) and the smaller New Zealand office (approximately 15 staff) is located in Wellington on the North Island.

Useful links
Relevant documents
Stacked events:

FSANZ does not: Separately assess food from stacked event lines where food from the GM parents has already been approved; Mandate notification of stacked events by developers; Notify the public of stacked event ‘approvals’; List food derived from stacked event lines in the Code, unless the stacked event line has been separately assessed as a single line e.g. Application A518: MXB-13 cotton (DAS-21023-5 x DAS-24236-5)

Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:

Food Standards Australia New Zealand (FSANZ) (http://www.foodstandards.gov.au)

Republic of Korea
Name of product applicant: Monsanto Korea Ltd.
Summary of application:

Increased Ear Biomass

Upload:
Date of authorization: 27/04/2017
Scope of authorization: Food and feed
Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.):
Summary of the safety assessment (food safety):
Please see the link below(in Korean).
Upload:
Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained:
Relevant links to documents and information prepared by the competent authority responsible for the safety assessment:
Upload:
Authorization expiration date (a blank field means there is no expiration date)
E-mail:
Organization/agency name (Full name):
Ministry of Food and Drug Safety
Contact person name:
Website:
Physical full address:
Osong Health Technology Administration Complex, 187, Osongsaengmyeong 2-ro, Osong-eup, Cheongwon-gun, Chungcheonbuk-do, 363-700, Korea
Phone number:
82-43-719-2360
Fax number:
Country introduction:
Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
United States of America
Name of product applicant: Monsanto Company
Summary of application:

Corn


Added Protein: ATHB17Δ113


Source: Arabidopsis thaliana


Intended Effect: Increase ear biomass at R1 developmental stage

Upload:
Date of authorization: 06/07/2016
Scope of authorization: Food and feed
Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.):
Summary of the safety assessment (food safety):
Please consult the FDA website links below.
Upload:
Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained:
Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: FDA's webpage regarding this variety
Upload:
Authorization expiration date (a blank field means there is no expiration date)
E-mail:
Organization/agency name (Full name):
Food and Drug Administration
Contact person name:
Jason Dietz
Website:
Physical full address:
5100 Paint Branch Parkway, College Park MD 20740
Phone number:
240-402-2282
Fax number:
Country introduction:

The United States is currently in the process of populating this database. The Food and Drug Administration regulates food and feed (food for humans and animals) from genetically engineered crops in conjunction with the Environmental Protection Agency (EPA). EPA regulates pesticides, including those that are plant incorporated protectants genetically engineered into food crops, to make sure that pesticide residues are safe for human and animal consumption and do not pose unreasonable risks of harm to human health or the environment. FDA In the Federal Register of May 29, 1992 (57 FR 22984), FDA published its "Statement of Policy: Foods Derived from New Plant Varieties" (the 1992 policy). The 1992 policy clarified the agency's interpretation of the application of the Federal Food, Drug, and Cosmetic Act with respect to human and animal foods derived from new plant varieties and provided guidance to industry on scientific and regulatory issues related to these foods. The 1992 policy applied to all foods derived from all new plant varieties, including varieties that are developed using genetic engineering (also known as recombinant deoxyribonucleic acid (rDNA) technology). In the 1992 policy, FDA recommended that developers consult with FDA about foods from genetically engineered plants under development and developers have routinely done so. In June 1996, FDA provided additional guidance to industry on procedures for these consultations (the consultation procedures). These procedures describe a process in which a developer who intends to commercialize food from a genetically engineered plant meets with the agency to identify and discuss relevant safety, nutritional, or other regulatory issues regarding the genetically engineered food and then submits to FDA a summary of its scientific and regulatory assessment of the food. FDA evaluates the submission and if FDA has questions about the summary provided, it requests clarification from the developer. At the conclusion of the consultation FDA responds to the developer by letter. The approach to the safety assessment of genetically engineered food recommended by FDA during consultations, including data and information evaluated, is consistent with that described in the Codex Alimentarius Guideline for the Conduct of Food Safety Assessment of Foods Derived from Recombinant-DNA Plants. EPA The safe use of pesticidal substances is regulated by EPA. Food from a genetically engineered plant that is the subject of a consultation with FDA may contain an introduced pesticidal substance, also known as a plant-incorporated protectant (PIP), that is subject to food (food for humans and animals) safety and environmental review by EPA. PIPs are pesticidal substances produced by plants and the genetic material necessary for the plant to produce the substance. Both the PIP protein and its genetic material are regulated by EPA. When assessing the potential risks of PIPs, EPA requires studies examining numerous factors, such as risks to human health, non-target organisms and the environment, potential for gene flow, and insect resistance management plans, if needed. In regulating PIPs, decisions are based on scientific standards and input from academia, industry, other Federal agencies, and the public. Before the first PIP product was registered in 1995, EPA required that PIP products be thoroughly tested against human safety standards before they were used on human food and livestock feed crops. EPA scientists assessed a wide variety of potential effects associated with the use of PIPs, including toxicity, and allergenicity. These potential effects were evaluated in light of the public's potential exposures to these pesticides, taking into account all potential combined sources of the exposure (food, drinking water, etc.) to determine the likelihood that a person exposed at these levels would be predisposed to a health risk. Based on its reviews of the scientific studies and often peer reviews by the Federal Insecticide, Fungicide and Rodenticide Scientific Advisory Panel, EPA determined that these genetically engineered PIP products, when used in accordance with approved label directions and use restrictions, would not pose unreasonable risk to human health and the environment during their time-limited registration.

Useful links
Relevant documents
Stacked events:

Stacked events that are each plant incorporated protectants, as defined by the Environmental Protection Agency, must be registered by the Envriornmental Protection Agency before they can be commercialized.  Food/feed safety asssessment of single events are generally sufficient to ensure the safety of food/feed from stacked events.   

Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:

Food and Drug Administration ([email protected]); Environmental Protection Agency