FAO.org

Once a decision is taken to establish an MPI system, this module puts forward the aspects to be considered in organizing such a system and discusses possible institutional/organizational set ups. The following four organizational options are distinguished: Setting up an MPI capacity at central government level, but not directly affiliated to a line ministry; as a special unit in a line ministry (e.g. Ministry of Agriculture); as a separate project-type unit; as an external institution (research institute, NGO, consulting firm). Each of these options has special advantages and disadvantages. Which of the options is selected depends on the policy to be monitored, on the expectations from [...]

This paper presents the eight methodo-“logical” steps for monitoring policy impacts (MPI), comprising: Step 1: Initiation and preparation of MPI Step 2: Policy review and analysis Step 3: Development of the impact model Step 4: Selection of impact indicators Step 5: Research design Step 6: Information and data collection Step 7: Data compilation, processing and analysis Step 8: Feedback of results of MPI to policy makers, clients, public. It is pointed out that the eight steps represent a logical sequence but that the steps are closely interlinked and that there are likely possible feedback cycles to previous steps. In a concluding section, conditions for a practical application of MPI [...]

This module documents calculation and use of Lorenz curves for inequality analysis. Specifically, it illustrates how Generalised Lorenz (GL) Curves can be used to identify the best income distribution on social welfare grounds within a set of alternative income distributions generated by different policy options where ordinary Lorenz curves fail to work. It is developed for capacity developent and operational purposes.

This module illustrates how Generalised Lorenz (GL) Curves can be used to identify the best income distribution on social welfare grounds, within a set of alternative income distributions generated by different policy options, in many of the cases where ordinary Lorenz curves fail to work. After illustrating some pitfalls of ordinary Lorenz Curves, a cursory presentation of the step-by-step procedure to check for Generalised Lorenz dominance and to infer welfare judgements is provided and demonstrated with some simple numerical examples. This module also points out the limitations of the GL approach whenever GL curves cross each other. In addition, it illustrates [...]

This analytical tool illustrates how to use objective methods to derive Equivalence scales. The focus will be on the Engel method, on the Rothbarth method and on the Utility-based methods. The main difference between these methods is that the first two are based on proxy variables for the household well-being, while the last set of methods is based on the consideration of the overall preferences revealed by consumers. For further information, see also: Equivalence Scales: General Aspects. EASYPol Series 032 Equivalence Scales. Subjective Methods. EASYPol Series 033 This paper is part of a FAO Policy series: EASYPol-Resources for policy making (in agriculture, rural development [...]

This analytical tool illustrates how to use subjective methods to derive equivalence scales. Different methods exist, but the focus will be on parametric methods. These methods are based on the definition of two broad sets of parameters. The first defines the degree of economies of scale within any given household; the second defines how much any further member adds to the cost of running a family. As we will see, the two concepts are linked, giving rise to a variety of ways to parameterise equivalence scales. For further information, see also: Impacts of Policies on Poverty. The Definition of Poverty. EASYPol Series [...]

This analytical tool illustrates how inequality and poverty analysis may be carried out when the income distribution is defined over households (i.e. household incomes) and not over individuals (i.e. individual incomes). When household incomes are considered, a problem arises with regard to the possibility of comparing monetary incomes of different households with different numbers of inhabitants. In this case, and as described in this module, a correction should be made to meaningfully compare different situations. This correction is called an equivalence scale. An equivalence scale may be a simple per capita measure or a more sophisticated way to take into [...]

This analytical tool illustrates advanced ways to measure poverty. It belongs to a set of EASYPol modules that discuss how to measure poverty according to different perspectives. In particular, this module will deal with generalised poverty gap measures, i.e. those poverty measures based on the definition of the poverty gap. The Sen index, the Foster-Greer-Thorbecke index, the Kakwani index and the Thon index will be discussed. Many public policies may have an impact on poor people. In policy work it is therefore important to simulate the impact of alternative policies on poverty and to rank policy options according to a wide range of poverty measures. This paper will [...]

This analytical tool illustrates advanced ways to measure poverty. It belongs to a set of modules that discuss how to measure poverty according to different perspectives. In particular, this module will deal with distributional poverty measures, i.e. those poverty measures based on some inequality measures. The Sen-Kakwani index, the Blackorby-Donaldson index and the Takayama index will be discussed. Many public policies may have an impact on poor people. In policy work it is therefore important to simulate the impact of alternative policies on poverty and to rank policy options according to a wide range of poverty measures. This module will provide the framework for such an analysis.  For more [...]

This analytical tool describes two of the most commonly used poverty measures in applied policy works, i.e., the headcount ratio (HR) and the poverty gap (PG) ratio. These are basic poverty indicators used to investigate impacts of public policies on poverty. After providing a conceptual background to HR and PG, this module describes step-by-step procedures and provides numerical examples to calculate these measures. In addition, advantages and shortcomings of these measures are discussed, and their explanatory power is investigated. For more information, see also: Impacts of Policies on Poverty. The Definition of Poverty. EASYPol Series 004 Impacts of Policies on Poverty. Absolute Poverty [...]