Manuals and Guides - BOBP/MAG/12 How to Build a Timber Outrigger CanoebyO. Gulbrandsen Consultant Naval Architect |
Executing Agency: FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS BAY OF BENGAL PROGRAMME Madras, India Provincial Fisheries Service of North Sumatera |
The designations employed and the presentation of material in this publication do not imply the expression of any opinion whatsoever on the part of the Food and Agriculture Organization of the United Nations concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries. |
All rights reserved. Reproduction and dissemination of material in this information product for educational or other non-commercial purposes are authorized without any prior written permission from the copyright holders provided the source is fully acknowledged. Reproduction of material in this information product for resale or other commercial purposes is prohibited without written permission of the copyright holders. Applications for such permission should be addressed to the Chief, Publishing and Multimedia Service, Information Division, FAO, Viale delle Terme di Caracalla, 00100 Rome, Italy or by email to [email protected]
© FAO 2004
Dug-out outrigger canoes, traditional fishing craft found from Madagascar in the west to Indonesia and the Pacific Islands in the east, are made from tree trunks of adequate diameter. But logs for construction of large canoes are becoming difficultto find and construction is consequently becoming more and more expensive. Dug-out construction also wastes a lot of timber. For each dugout canoe, two or three planked canoes can be built. The Bay of Bengal Programme (BOBP) undertook a project in Nias Island, Sumatera, Indonesia, and Shri Lanka to design and construct planked outrigger canoes that would provide an answer to the problems now being laced in building the traditional outrigger canoes. |
INTRODUCTION