|Countries, regions, river basins|
|Irrigation and drainage|
|Maps and spatial data|
Info for the media
|Did you know...?|
|Visualizations and infographics|
|SDG Target 6.4|
Country profile section|
Regional analysis section
Data from Main Database
The CGIAR Research Programme on Water, Land and Ecosystems, led by the International Water Management Institute (IWMI), and the Land and Water Division of FAO are collaborating to collect, analyze and validate the best available data on municipal wastewater production, collection, treatment, discharge and direct use for irrigation purposes. The results of this collaboration are available in AQUASTAT, also announced on IWMI's website.
As of October 2016, about 2 300 municipal wastewater-related data points and 1 300 metadata are available in the Main Database.
AQUASTAT does not have a wastewater section per se in the country profiles and not for all countries information on wastewater is available. If information is available, it can be found in either the "Water resources" or the "Water use" section of the profile. Dropdowns to both are given below, so that the user can quickly check both sections for possible information related to wastewater production, treatment and direct use.
As is the case with the country profiles, AQUASTAT also does not have a wastewater section per se in the regional analyses. If information is available, it can be found in either the "Water resources" or the "Water use" section of the analysis, for example using the expression "Other sources of water" or "Non-conventional sources of water". Dropdowns to both are given below, so that the user can quickly check both sections for possible information related to wastewater production, treatment and direct use.
For the convenience of users, AQUASTAT provides the following queries to the Main Database, providing the most up-to-date data at the click of a button. Please note that the data presented is a summary of available data. For more detail, or to fine-tune the query, go to the AQUASTAT Main Database query page.
Definitions of wastewater-related terms and variables are included in the AQUASTAT glossary and can be consulted by clicking on the names below. The figures between square brackets refer to the figures between square brackets in the diagram further below.
While other existing wastewater databases often focus on percentage of sanitation coverage or pollution loads, AQUASTAT focuses on annual volumes at national level. The reason for choosing volume as the parameter is to facilitate the integration of these data in the water resources and use accounts in the different countries.
The diagram put further below illustrates the flow of wastewater from production to use. The variables squared in blue in that diagram are available by opening the wastewater category in the AQUASTAT Main Database, shown below.
The variables - can be accessed under the category "Wastewater" and have the unit km3/year or 10^9 m3/year, except for variable , which refers to the number of treatment facilities. The variables - can be accessed both under the category "Wastewater" and under the category "Irrigation and drainage development", sub-category "Area equipped for irrigation by source of water", and have the unit 1000 ha. Information on the level of treatment is, if available, provided in the metadata of the variable "Treated municipal wastewater" .
Click on the chart to magnify
Data sources, selection and validation
Data collection takes place through review of country briefs and national reports, databases, technical reports, peer-reviewed publications, information provided by national experts, presentations from national authorities in seminars, Internet search, etc.
Since data come from many different sources, inconsistencies may occur over the course of time. Therefore, each time new data become available a detailed review and validation of all data, both new ones obtained and the ones already available in the database, is essential.
Data is validated in relation to a time span from 1958 to 2012, based on the assumption that mainly the annual volume of wastewater produced, but probably also the annual volume collected, treated, discharged or directly used should - unless justified, such as for example due to contraction in the municipal population growth - show incremental increase as water use would rise over time.
Data is also validated in relation to various stages of the wastewater cycle, i.e. wastewater production (assumed to be the highest volume), wastewater collection, treatment and direct use (lowest volume of water).
A list of all publications is available on the Publications page. A non-exhaustive selection of some publications more specifically related to this page is given below:Global database on municipal wastewater production, collection, treatment,
discharge and direct use in agriculture
Disambiguation of water statistics
Cooling water for energy generation and its impact on national-level water
|Printer friendly version|
|Quote as: FAO. 2016. AQUASTAT website. Food and Agriculture Organization of the United Nations (FAO). Website accessed on [yyyy/mm/dd].|
|© FAO, 2016 | Questions or feedback? firstname.lastname@example.org|
|Your access to AQUASTAT and use of any of its information or data is subject to the terms and conditions laid down in the User Agreement.|